What to do if the printed output is too dark on Konica Minolta All in One Printer?
If the printed output from your Konica Minolta All in One Printer is too dark: * Check if the copy density is set to [Dark]. If so, press [Light] in the Density screen to adjust the copy density. * Ensure the original is pressed closely against the original glass during copying.
What to do if the printed output is too light on Konica Minolta All in One Printer?
If the printed output from your Konica Minolta All in One Printer is too light: * Check if the copy density is set to [Light]. If it is, press [Dark] in the Density screen to copy at the desired copy density. * The paper might be damp, in which case you should replace it with new paper.
How to fix dark specks or spots on Konica Minolta BIZHUB C452 printed output?
To resolve dark specks or spots throughout the printed output on your Konica Minolta All in One Printer, consider these possible causes and solutions: * If the original glass is dirty, wipe it with a soft, dry cloth. * For a dirty slit glass, clean it with the slit glass cleaner. * If the document pad is dirty, clean it with a soft cloth dampened with a mild detergent. * If the original was printed on highly translucent material, place a blank sheet of paper on top of the original. * When copying a thin 2-sided original, select a lighter background density in the Background Removal screen. * If the electrostatic charger wire is dirty, use the charger-cleaning tool to clean the electrostatic charger.
Why is the printed image blurry on my Konica Minolta BIZHUB C452 All in One Printer?
If the printed image from your Konica Minolta All in One Printer is blurry, it could be due to the following reasons: * The paper might be damp, in which case you should replace it with new paper. * The original may not have been pressed closely enough against the original glass. Ensure the original is positioned so that it makes good contact with the glass.
What to do if Konica Minolta BIZHUB C452 does not start up?
If your Konica Minolta All in One Printer does not start up when the main power switch is turned on: * Ensure the power supply plug is correctly inserted into the electrical outlet. * Check if the sub power switch has been turned on, and if not, turn it on.
Why copying does not start on my Konica Minolta All in One Printer?
If copying does not start on your Konica Minolta All in One Printer: * Make sure the upper right-side door of the machine is securely closed. * Ensure that there is paper that matches the original loaded in the paper tray.
How to fix dirty edge of the printed image on Konica Minolta BIZHUB C452?
If the edge of the printed image is dirty on your Konica Minolta All in One Printer, consider the following: * Clean the document pad with a soft cloth dampened with a mild detergent. * Ensure the selected paper size is the same as the original, or select Auto to enlarge the copy to the selected paper size. * Verify that the size and orientation of the original match that of the paper. * If the copy was reduced to a size smaller than the paper, select a zoom ratio that adjusts the original size to the selected paper size, or select Auto to enlarge the copy to the selected paper size.
What to do if the message 'Trouble' appears on Konica Minolta All in One Printer?
If your Konica Minolta All in One Printer is displaying a "Trouble" message, perform the operation described in the message or contact your service representative.
Why is the original not fed into my Konica Minolta BIZHUB C452 All in One Printer?
If the original is not feeding into your Konica Minolta All in One Printer: * Ensure the ADF is securely closed. * Verify that the original meets the specifications for the ADF. * Make sure the original is correctly loaded.
What to do if Konica Minolta BIZHUB C452 All in One Printer doesn't produce copies after clearing paper jam?
If you've cleared a paper jam on your Konica Minolta All in One Printer but copies still cannot be produced, check for paper jammed at other locations and remove it.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Speed | 45 ppm |
| Scan Resolution | 600 x 600 dpi |
| Copy Speed | 45 cpm |
| Copy Resolution | 600 x 600 dpi |
| Monthly Duty Cycle | 150, 000 pages |
| Duplex Printing | Yes |
| Hard Drive | 250 GB |
| Type | Color Laser |
| Print Resolution | 1200 x 1200 dpi |
| Fax Resolution | 200 x 200 dpi |
| Paper Capacity | 3, 650 sheets |
| Paper Size | A3, A4, A5, B4, B5 |
| Connectivity | USB, Ethernet |
| Memory | 2 GB |
| Display | 8.5-inch color touch panel |
To Next Page