To Next PageTo Next PageHow to resolve 'Data List is empty !' error on Konica Minolta Bizhub C10 All in One Printer?
If your Konica Minolta All in One Printer displays 'Data List is empty !', it means there is no group location list when registering the group. Add locations to the group list before registering.
What to do if Konica Minolta All in One Printer shows 'Connect error ! Change to off-line edit mode'?
If your Konica Minolta All in One Printer displays a 'Connect error ! Change to off-line edit mode' message, it means the connection was lost. This can happen if the USB cable is disconnected or the user machine is turned off during USB connection. To fix this, reconnect the USB cable or turn on the user machine.
Why Konica Minolta Bizhub C10 All in One Printer says 'Password is not correct !'?
If your Konica Minolta All in One Printer displays 'Password is not correct !', it means the password entered in the “Administrator” of “Utility Setting” is incorrect. Please re-enter the correct administrator password to proceed.
How to resolve 'Error opening USB Port !' on Konica Minolta Bizhub C10?
If your Konica Minolta All in One Printer displays 'Error opening USB Port !', it means the specified USB port cannot be used with the computer currently in use. Try using a different USB port that is compatible with your computer.
What to do if Konica Minolta Bizhub C10 All in One Printer shows 'Connect Fail !'?
If your Konica Minolta All in One Printer displays 'Connect Fail !', it means the remote connection has failed. Check your remote connection settings to ensure they are correct.
Why does my Konica Minolta All in One Printer say 'Machine busy'?
If your Konica Minolta All in One Printer displays 'Machine busy', it means the user machine is currently in use, preventing a new connection. Wait until the user machine is free before attempting to connect.
What to do if Konica Minolta Bizhub C10 All in One Printer prompts 'E-Mail address must be specified !'?
If your Konica Minolta All in One Printer shows 'E-Mail address must be specified !', it means you haven't entered anything in the E-mail address field. Enter a valid E-mail address.
What causes 'Machine timeout' on Konica Minolta Bizhub C10 and how to fix it?
If your Konica Minolta All in One Printer displays 'Machine timeout', it indicates a timeout occurred during connection with the user machine. Try reconnecting the user machine to resolve the issue.
How to resolve Letter-size paper request when using Mac OS X 10.4 with a custom paper size of 21.6 cm width on Konica Minolta Bizhub C10?
Change the width of the custom paper size to 21.59 cm, and then try sending the job again.
How to fix Konica Minolta Bizhub C10 All in One Printer not detected by Rendezvous/Bonjour?
Using Administrator mode in PageScope Web Connection, select the Enable from the Bonjour list on the Bonjour page.
General| Category | All in One Printer |
|---|---|
| Type | Laser |
| Functions | Print, Copy, Scan |
| Printing Technology | Laser |
| Print Speed (Black) | 10 ppm |
| Max Resolution (BW) | 600 x 600 dpi |
| Copy Speed (Black) | 10 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Connectivity | USB 2.0 |
| Operating System Compatibility | Windows, Mac |
