E-1
INSTALLATION MANUAL
A00H-9627-00
<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.
I. Outline of installation procedures
When installing the machine and associated options as a system, follow the order shown on the upper.
Note:
• For the detailed installation procedures for each option, follow the instructions given in the corresponding
installation manual and perform the procedures correctly.
• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.
• When transporting the machine, assign an adequate number of persons to the job and follow the speci-
fied correct procedures.
(mass: approx. 190 kg (418-3/4 lb))
OT-503
Machine
Electron system options
DF-610SP-501
IC-409*
EK-602*
✱ Electron system options
ML-501 FK-502
SC-503*
FK-502*
WT-502
AU-201
FS-517 FS-608
PK-512 PK-513
LU-301
* : No particular order in installation procedures.
AU-101
PI-503
A00HIXC003DA
Applied Machine:
To Next Page
Need help?
General
