To Next PageTo Next PageWhy does my Konica Minolta bizhub PRESS C8000 Printer have troubles of paper feed and paper exit?
If you're experiencing issues with paper feed and exit on your Konica Minolta Printer, and coated paper is misfeeding, enable the [ON] setting for [Dryness Preparation]. Also, adjust the [Fan Heater Control (Tray4 - 9)] to either [Auto] or [Compulsive ON].
General| Print Speed | 80 ppm (A4) |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Print Technology | Laser |
| Supported Media Weights | 52 - 300 gsm |
| Operating Systems Supported | Windows, macOS, Linux |
| Connectivity | Ethernet, USB |
| Dimensions | 1, 200 x 1, 200 x 1, 200 mm |
| Duplex Printing | Yes |
| Supported Media Types | Coated |
| Memory | 2 GB |
| Power Consumption | 1.5 kW |
| Supported Media Sizes | A3, A4, A5, B4, B5, Legal, Letter |
Instructions for powering the machine on and off, including switch locations and procedures.
Instructions for installing the XPS printer driver for Windows systems.
How to scan documents and send them as email attachments using the IC-601 controller.
Instructions for scanning documents and sending them to a shared server (SMB) via the IC-601 controller.
Configuring network settings for the Fiery controller via Command WorkStation or Web Tools.
Steps to safely remove jammed paper and clear misfeeds from the machine.
