What to do if Konica Minolta Printer displays 'Cartridge, imaging unit mismatch [41.xy]'?
To resolve a cartridge and imaging unit mismatch on your Konica Minolta printer, change the toner cartridge or imaging unit so that both are non-MICR supplies.
What to do if my Konica Minolta Printer says 'Cartridge low [88.xy]'?
If your Konica Minolta printer indicates that the cartridge is low, you may need to order a new toner cartridge. If you want to continue printing temporarily, select Continue on the printer control panel to clear the message.
How to fix Konica Minolta bizhub 4000P 'Reinstall missing or unresponsive cartridge [31.xy]' error?
To resolve the 'Reinstall missing or unresponsive cartridge' error on your Konica Minolta printer: * First, check if the toner cartridge is missing and install it if it is. * If the cartridge is already installed, remove it and then reinstall it to ensure it is properly connected.
What to do if Konica Minolta bizhub 4000P Printer shows 'Load [paper source] with [custom string] [paper orientation]'?
If your Konica Minolta printer prompts you to load a specific paper, load the tray or feeder with the correct size and type of paper indicated in the message.
What to do if Konica Minolta bizhub 4000P displays 'Cartridge nearly low [88.xy]'?
If your Konica Minolta printer warns that the cartridge is nearly low, you can select Continue on the printer control panel to clear the message and proceed with printing, if necessary.
How to resolve Konica Minolta bizhub 4000P Printer 'Insufficient memory for Flash Memory Defragment operation [37]' error?
To resolve the 'Insufficient memory for Flash Memory Defragment operation' error on your Konica Minolta printer, delete fonts, macros, and other data from the printer memory.
What to do if Konica Minolta bizhub 4000P displays 'Too many trays attached [58]'?
If your Konica Minolta printer displays a message indicating too many trays are attached, remove the extra trays.
What to do if Konica Minolta bizhub 4000P displays 'Defective flash detected [51]'?
If your Konica Minolta printer detects a defective flash, replace the defective flash memory card.
What to do if Konica Minolta Printer displays 'Replace cartridge, 0 estimated pages remain [88.xy]'?
If your Konica Minolta printer displays a message indicating that you need to replace the cartridge with 0 estimated pages remaining, replace the toner cartridge to clear the message and continue printing.
Why does my Konica Minolta Printer say 'Cartridge very low, [x] estimated pages remain [88.xy]'?
If your Konica Minolta printer is displaying a 'Cartridge very low' message with an estimate of remaining pages, it means you may need to replace the toner cartridge very soon.
Safety precautions and steps to take before physically moving the printer.
Explains the general meanings of warning and caution symbols used in the manual.
Lists critical warnings and cautions to prevent printer damage or personal injury.
Guides users on where to find specific information about the printer.
Provides guidance on choosing a suitable place to install the printer.
Instructions for installing optional hardware or memory devices inside the printer.
Steps for attaching additional paper trays to the printer.
Instructions for installing the printer driver on Windows and Macintosh systems.
Introduces network setup for the printer.
Steps to install the printer on an Ethernet network for Windows and Macintosh.
Details required information for setting up a wireless network connection.
How to confirm the printer is correctly set up after installation.
Overview of the printer's physical components and configurations.
Explains the functions of the printer's control panel buttons and display.
Explains the meaning of indicator and sleep button light colors.
Instructions for connecting printer cables (USB and Ethernet).
Explains how to access the printer's controller board for maintenance or upgrades.
General guidance on loading various types of paper and media.
Steps to configure paper size and type settings from the control panel.
Instructions for loading paper into the bizhub 4000P and 4700P paper trays.
Guide on how to load paper and specialty media into the multipurpose feeder.
How to configure trays to work together for continuous paper feeding.
Provides a comprehensive list of the printer's menu structure.
Details the options available within the Paper menu.
How to set the default paper source for print jobs.
Options for specifying paper size and type for trays and feeders.
Settings for paper size and type in the multipurpose feeder.
Settings for paper size and type when manually loading paper.
Settings for envelope size and type when manually loading envelopes.
Configuration options for the multipurpose feeder's paper selection.
How the printer substitutes paper sizes when the requested one is unavailable.
Options for specifying the paper's surface texture.
Options for specifying the paper's weight.
Settings related to duplex printing and paper loading.
Features for associating media types with custom names.
General setup options for units of measure, portrait width, and height.
Options for printing various printer reports.
Network and port configuration settings.
Configuration for TCP/IP network settings.
Configuration settings for Internet Protocol version 6.
Settings for configuring and managing wireless network connections.
Settings related to AppleTalk network support.
Configuration options for USB connections.
Configuration for sending email notifications via SMTP.
Tips and methods for reducing paper and toner consumption.
Information on using recycled paper for environmental consciousness.
Various ways to reduce paper and toner usage during printing.
Guidance on preventing paper jams by proper settings.
Step-by-step instructions for cleaning the printer's exterior and interior.
Information on purchasing genuine Konica Minolta parts and supplies.
Details on how to order replacement toner cartridges.
Information on ordering replacement imaging units.
How to estimate remaining page count for supplies.
Guidelines for storing printer supplies properly.
General information on replacing printer supplies.
Detailed procedure for replacing the toner cartridge.
Step-by-step guide for replacing the printer's imaging unit.
Safety precautions and steps to take before physically moving the printer.
Guidelines for safely relocating the printer and its options.
Advice on packaging and preparing the printer for shipping.
Tips and best practices to prevent paper jams from occurring.
Instructions on correctly loading paper into trays to prevent jams.
Guidance on selecting and using appropriate paper types to avoid jams.
Explains printer messages related to paper jams and their locations.
Steps to clear a jam when the front door is opened.
Steps to clear a jam when the rear door is opened.
Instructions for clearing a jam from the standard paper bin.
Steps to clear a jam involving tray 1 and the duplex unit.
Instructions to clear a jam from a specific tray [x].
Steps to clear a jam from the multipurpose feeder.
Explains various error messages and prompts displayed by the printer.
Resolves issues related to incompatible cartridge and imaging unit combinations.
Addresses low toner cartridge warnings and provides solutions.
Handles warnings for toner cartridges nearing depletion.
Instructions for replacing a toner cartridge that is very low.
Instructions for loading paper when prompted for a specific type.
Loading paper based on custom string and orientation prompts.
Loading paper based on specified size and orientation.
Loading paper with specific type, size, and orientation.
Simple instruction to close the printer's front door.
Troubleshooting steps for pages with complex data that may not print.
Addresses issues with held print jobs after configuration changes.
Troubleshooting for errors related to defective flash memory.
Solves errors when reading USB drives.
Solves errors related to USB hubs.
Guides on low imaging unit warnings and replacement.
Addresses warnings for imaging units nearing depletion.
Instructions for replacing an imaging unit that is very low.
Troubleshooting steps for incorrect paper size errors.
Instruction to insert a specific printer tray.
Solutions for insufficient memory errors affecting Resource Save.
Addresses insufficient memory errors during job collation.
Troubleshooting insufficient memory for defragmentation.
Explains why held jobs might be deleted due to memory issues.
Addresses issues with held jobs not being restored due to memory constraints.
Loading paper into the manual feeder with custom type.
Loading paper into the manual feeder with custom string.
Loading paper into the manual feeder with specified size.
Loading paper into the manual feeder with specific type and size.
Guides on low maintenance kit warnings and replacement.
Addresses warnings for maintenance kits nearing depletion.
Instructions for replacing a maintenance kit that is very low.
Troubleshooting steps for when the printer's memory is full.
Resolves software errors related to network connections.
Addresses issues with non-genuine manufacturer supplies or parts.
Solutions for errors indicating insufficient flash memory.
Addresses printer restarts and potential incomplete jobs.
Steps to reinstall or fix unresponsive toner cartridges.
Steps to reinstall or fix unresponsive imaging units.
Instruction to clear paper from the output bin.
Guides on replacing cartridges with zero estimated pages remaining.
Resolves errors related to printer region and cartridge region mismatches.
Guides on replacing imaging units with zero estimated pages remaining.
Addresses warnings for maintenance kits with zero estimated pages remaining.
Instructions for replacing unsupported toner cartridges.
Instructions for replacing unsupported imaging units.
Troubleshooting serial port option errors.
Guides on configuring the SMTP server for email notifications.
Resolves standard network software errors.
Troubleshooting steps when the USB port is disabled.
Addresses errors related to too many flash options installed.
Resolves issues when too many trays are attached to the printer.
Troubleshooting steps for unformatted flash memory.
Addresses errors for unsupported options in printer slots.
Guides on setting up the Weblink server and contacting support.
General troubleshooting for printers that are not responding.
Step-by-step guide for diagnosing why the printer is not responding.
Troubleshooting steps when the printer's display is blank.
Steps to resolve issues where the printer cannot detect an internal option.
Troubleshooting steps for malfunctioning or unrecognized paper trays.
Paper feed issues and troubleshooting steps for frequent paper jams.
General troubleshooting for print jobs that do not output.
Solves issues with printing PDF files containing multiple languages.
Troubleshooting steps when errors occur reading flash drives.
General troubleshooting for print jobs that do not output.
Addresses issues with confidential and held print jobs not printing.
Troubleshoots print jobs that take an unusually long time to complete.
Resolves issues where jobs print from incorrect trays or on wrong paper.
Troubleshooting steps for when incorrect characters appear in prints.
Addresses issues where printer trays are not linking correctly.
Solves problems with large print jobs not collating properly.
Troubleshooting steps for unexpected page breaks in printouts.
Fixes for jagged or uneven character edges in prints.
Troubleshooting steps for pages or images that appear clipped.
Resolves issues where shadow images appear on printed pages.
Troubleshooting steps for unwanted gray backgrounds on prints.
Fixes for incorrect print margins.
Troubleshooting steps for paper that curls after printing.
General troubleshooting for various print quality irregularities.
Addresses repeating defects or patterns on printed pages.
Troubleshooting steps when print output is too dark.
Troubleshooting steps when print output is too light.
Resolves issues where the printer outputs blank pages.
Troubleshooting steps for prints that are skewed or misaligned.
Resolves issues where the printer outputs solid black pages.
Troubleshooting steps for poor print quality on transparencies.
Fixes for horizontal streaks appearing on printed pages.
Fixes for vertical streaks appearing on printed pages.
Addresses horizontal voids or gaps in print output.
Addresses vertical voids or gaps in print output.
Troubleshooting steps for toner specks on printed pages.
Resolves toner fog or background shading issues on prints.
Troubleshooting steps for toner that rubs off printed pages.
Fixes for uneven print density across the page.
Troubleshooting steps when the Embedded Web Server fails to open.
Legal notice regarding copyright of the document.
Information about the manual's edition and registered trademarks.
Terms and conditions for licensing the printer software.
Specifies the noise emission levels of the printer according to standards.
Special information for users in EU member states regarding disposal.
Instructions on how to dispose of the printer and supplies responsibly.
Information about the printer's ENERGY STAR compliance for energy efficiency.
Explains the benefits and features of ENERGY STAR certified products.
Specifies recommended ambient and storage temperature ranges for the printer.
Details the power consumption of the printer in various operating modes.
Explains the printer's energy-saving Sleep Mode and its timeout settings.
Describes the ultra-low power Hibernate mode and how to enter it.
Information on completely stopping power consumption by disconnecting the power cord.
Guidance on calculating the printer's total energy usage.
Safety precautions and steps to take before physically moving the printer.
Explains the general meanings of warning and caution symbols used in the manual.
Lists critical warnings and cautions to prevent printer damage or personal injury.
Guides users on where to find specific information about the printer.
Provides guidance on choosing a suitable place to install the printer.
Instructions for installing optional hardware or memory devices inside the printer.
Steps for attaching additional paper trays to the printer.
Instructions for installing the printer driver on Windows and Macintosh systems.
Introduces network setup for the printer.
Steps to install the printer on an Ethernet network for Windows and Macintosh.
Details required information for setting up a wireless network connection.
How to confirm the printer is correctly set up after installation.
Overview of the printer's physical components and configurations.
Explains the functions of the printer's control panel buttons and display.
Explains the meaning of indicator and sleep button light colors.
Instructions for connecting printer cables (USB and Ethernet).
Explains how to access the printer's controller board for maintenance or upgrades.
General guidance on loading various types of paper and media.
Steps to configure paper size and type settings from the control panel.
Instructions for loading paper into the bizhub 4000P and 4700P paper trays.
Guide on how to load paper and specialty media into the multipurpose feeder.
How to configure trays to work together for continuous paper feeding.
Provides a comprehensive list of the printer's menu structure.
Details the options available within the Paper menu.
How to set the default paper source for print jobs.
Options for specifying paper size and type for trays and feeders.
Settings for paper size and type in the multipurpose feeder.
Settings for paper size and type when manually loading paper.
Settings for envelope size and type when manually loading envelopes.
Configuration options for the multipurpose feeder's paper selection.
How the printer substitutes paper sizes when the requested one is unavailable.
Options for specifying the paper's surface texture.
Options for specifying the paper's weight.
Settings related to duplex printing and paper loading.
Features for associating media types with custom names.
General setup options for units of measure, portrait width, and height.
Options for printing various printer reports.
Network and port configuration settings.
Configuration for TCP/IP network settings.
Configuration settings for Internet Protocol version 6.
Settings for configuring and managing wireless network connections.
Settings related to AppleTalk network support.
Configuration options for USB connections.
Configuration for sending email notifications via SMTP.
Tips and methods for reducing paper and toner consumption.
Information on using recycled paper for environmental consciousness.
Various ways to reduce paper and toner usage during printing.
Guidance on preventing paper jams by proper settings.
Step-by-step instructions for cleaning the printer's exterior and interior.
Information on purchasing genuine Konica Minolta parts and supplies.
Details on how to order replacement toner cartridges.
Information on ordering replacement imaging units.
How to estimate remaining page count for supplies.
Guidelines for storing printer supplies properly.
General information on replacing printer supplies.
Detailed procedure for replacing the toner cartridge.
Step-by-step guide for replacing the printer's imaging unit.
Safety precautions and steps to take before physically moving the printer.
Guidelines for safely relocating the printer and its options.
Advice on packaging and preparing the printer for shipping.
Tips and best practices to prevent paper jams from occurring.
Instructions on correctly loading paper into trays to prevent jams.
Guidance on selecting and using appropriate paper types to avoid jams.
Explains printer messages related to paper jams and their locations.
Steps to clear a jam when the front door is opened.
Steps to clear a jam when the rear door is opened.
Instructions for clearing a jam from the standard paper bin.
Steps to clear a jam involving tray 1 and the duplex unit.
Instructions to clear a jam from a specific tray [x].
Steps to clear a jam from the multipurpose feeder.
Explains various error messages and prompts displayed by the printer.
Resolves issues related to incompatible cartridge and imaging unit combinations.
Addresses low toner cartridge warnings and provides solutions.
Handles warnings for toner cartridges nearing depletion.
Instructions for replacing a toner cartridge that is very low.
Instructions for loading paper when prompted for a specific type.
Loading paper based on custom string and orientation prompts.
Loading paper based on specified size and orientation.
Loading paper with specific type, size, and orientation.
Simple instruction to close the printer's front door.
Troubleshooting steps for pages with complex data that may not print.
Addresses issues with held print jobs after configuration changes.
Troubleshooting for errors related to defective flash memory.
Solves errors when reading USB drives.
Solves errors related to USB hubs.
Guides on low imaging unit warnings and replacement.
Addresses warnings for imaging units nearing depletion.
Instructions for replacing an imaging unit that is very low.
Troubleshooting steps for incorrect paper size errors.
Instruction to insert a specific printer tray.
Solutions for insufficient memory errors affecting Resource Save.
Addresses insufficient memory errors during job collation.
Troubleshooting insufficient memory for defragmentation.
Explains why held jobs might be deleted due to memory issues.
Addresses issues with held jobs not being restored due to memory constraints.
Loading paper into the manual feeder with custom type.
Loading paper into the manual feeder with custom string.
Loading paper into the manual feeder with specified size.
Loading paper into the manual feeder with specific type and size.
Guides on low maintenance kit warnings and replacement.
Addresses warnings for maintenance kits nearing depletion.
Instructions for replacing a maintenance kit that is very low.
Troubleshooting steps for when the printer's memory is full.
Resolves software errors related to network connections.
Addresses issues with non-genuine manufacturer supplies or parts.
Solutions for errors indicating insufficient flash memory.
Addresses printer restarts and potential incomplete jobs.
Steps to reinstall or fix unresponsive toner cartridges.
Steps to reinstall or fix unresponsive imaging units.
Instruction to clear paper from the output bin.
Guides on replacing cartridges with zero estimated pages remaining.
Resolves errors related to printer region and cartridge region mismatches.
Guides on replacing imaging units with zero estimated pages remaining.
Addresses warnings for maintenance kits with zero estimated pages remaining.
Instructions for replacing unsupported toner cartridges.
Instructions for replacing unsupported imaging units.
Troubleshooting serial port option errors.
Guides on configuring the SMTP server for email notifications.
Resolves standard network software errors.
Troubleshooting steps when the USB port is disabled.
Addresses errors related to too many flash options installed.
Resolves issues when too many trays are attached to the printer.
Troubleshooting steps for unformatted flash memory.
Addresses errors for unsupported options in printer slots.
Guides on setting up the Weblink server and contacting support.
General troubleshooting for printers that are not responding.
Step-by-step guide for diagnosing why the printer is not responding.
Troubleshooting steps when the printer's display is blank.
Steps to resolve issues where the printer cannot detect an internal option.
Troubleshooting steps for malfunctioning or unrecognized paper trays.
Paper feed issues and troubleshooting steps for frequent paper jams.
General troubleshooting for print jobs that do not output.
Solves issues with printing PDF files containing multiple languages.
Troubleshooting steps when errors occur reading flash drives.
General troubleshooting for print jobs that do not output.
Addresses issues with confidential and held print jobs not printing.
Troubleshoots print jobs that take an unusually long time to complete.
Resolves issues where jobs print from incorrect trays or on wrong paper.
Troubleshooting steps for when incorrect characters appear in prints.
Addresses issues where printer trays are not linking correctly.
Solves problems with large print jobs not collating properly.
Troubleshooting steps for unexpected page breaks in printouts.
Fixes for jagged or uneven character edges in prints.
Troubleshooting steps for pages or images that appear clipped.
Resolves issues where shadow images appear on printed pages.
Troubleshooting steps for unwanted gray backgrounds on prints.
Fixes for incorrect print margins.
Troubleshooting steps for paper that curls after printing.
General troubleshooting for various print quality irregularities.
Addresses repeating defects or patterns on printed pages.
Troubleshooting steps when print output is too dark.
Troubleshooting steps when print output is too light.
Resolves issues where the printer outputs blank pages.
Troubleshooting steps for prints that are skewed or misaligned.
Resolves issues where the printer outputs solid black pages.
Troubleshooting steps for poor print quality on transparencies.
Fixes for horizontal streaks appearing on printed pages.
Fixes for vertical streaks appearing on printed pages.
Addresses horizontal voids or gaps in print output.
Addresses vertical voids or gaps in print output.
Troubleshooting steps for toner specks on printed pages.
Resolves toner fog or background shading issues on prints.
Troubleshooting steps for toner that rubs off printed pages.
Fixes for uneven print density across the page.
Troubleshooting steps when the Embedded Web Server fails to open.
Legal notice regarding copyright of the document.
Information about the manual's edition and registered trademarks.
Terms and conditions for licensing the printer software.
Specifies the noise emission levels of the printer according to standards.
Special information for users in EU member states regarding disposal.
Instructions on how to dispose of the printer and supplies responsibly.
Information about the printer's ENERGY STAR compliance for energy efficiency.
Explains the benefits and features of ENERGY STAR certified products.
Specifies recommended ambient and storage temperature ranges for the printer.
Details the power consumption of the printer in various operating modes.
Explains the printer's energy-saving Sleep Mode and its timeout settings.
Describes the ultra-low power Hibernate mode and how to enter it.
Information on completely stopping power consumption by disconnecting the power cord.
Guidance on calculating the printer's total energy usage.
General| Print Technology | Laser |
|---|---|
| Print Speed | Up to 42 ppm |
| Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | Up to 100, 000 pages |
| Standard Output Capacity | 150 sheets |
| Memory | 256 MB |
| Supported Operating Systems | Windows, Mac OS, Linux |
| Duplex Printing | Automatic |
| Connectivity | USB 2.0, Ethernet |
| PDL | PCL 6, PostScript 3, XPS |
| Processor Speed | 1.2 GHz |
To Next Page
