To Next PageTo Next PageWhat does 'Resolution Adapted' mean on my Konica Minolta bizhub 20P Printer?
If your Konica Minolta printer displays 'Resolution Adapted', reduce the complexity of your document before printing to prevent automatic reduction in resolution.
What to do if my Konica Minolta bizhub 20P says 'No Paper'?
If your Konica Minolta printer displays 'No Paper' or a 'Size Mismatch' error, it might be that the paper tray is out of paper or not correctly installed. Also, try cleaning the paper pick-up roller.
What to do if my Konica Minolta Printer says front cover is open?
If the front cover of your Konica Minolta printer is open, close it.
What does 'Toner Low' mean on my Konica Minolta bizhub 20P Printer?
If your Konica Minolta printer indicates 'Toner Low', you should buy a new toner cartridge and have it ready for when the 'Replace Toner' status appears.
How to fix 'Memory Full' error on Konica Minolta bizhub 20P Printer?
If your Konica Minolta printer displays 'Memory Full' or 'Print Overrun', press Go to print the remaining data, or cancel the job to delete it. You can also reduce the document's complexity or lower the print resolution. Adding more memory is another option.
What to do if my Konica Minolta Printer says 'No Toner'?
To resolve the 'No Toner' issue on your Konica Minolta printer, open the front cover and install the toner cartridge.
Why is my Konica Minolta bizhub 20P Printer printing white lines across the page?
If your Konica Minolta printer is displaying white lines across the page, make sure that you use paper that meets our specifications. The drum unit may be damaged.
Why is my Konica Minolta bizhub 20P printing black lines down the page?
If your Konica Minolta printer is printing black lines down the page, clean the primary corona wire inside the drum unit by sliding the blue tab. The drum unit may also be damaged.
Why is my Konica Minolta bizhub 20P not feeding paper from the MP tray?
If your Konica Minolta printer is not feeding paper from the MP tray, fan the paper well and put it back in firmly. Also, make sure you have selected the MP Tray in the Paper Source of the printer driver.
Why is my Konica Minolta bizhub 20P not feeding paper?
If your Konica Minolta printer is not feeding paper, ensure the paper in the tray is straight. If the paper is curled, straighten it before printing. You might also try removing the paper, turning the stack over, and putting it back. Reduce the amount of paper in the tray, and ensure manual feed mode is not selected in the printer driver. Cleaning the paper pick-up roller can also help.
General| Wi-Fi | - |
|---|---|
| Network ready | Yes |
| Color | No |
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 32 ppm |
| Maximum duty cycle | 30000 pages per month |
| Number of print cartridges | 1 |
| Page description languages | PCL 3, PCL 6 |
| Maximum internal memory | - MB |
| Sound pressure level (printing) | 52.6 dB |
| Total input capacity | - sheets |
| Maximum print size | 216 x 297 mm |
| Paper tray media types | Bond paper, Plain paper, Transparencies |
| ISO A-series sizes (A0...A9) | A4, A5 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Standard interfaces | Ethernet, Parallel, USB 2.0 |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 75 W |
| Power consumption (printing) | 675 W |
| Compatible operating systems | Windows XP, Vista, 7 Mac 10.3.9+ |
Weight and Dimensions| Dimensions (WxDxH) | 370.84 x 383.54 x 246.38 mm |
|---|
