What to do if Konica Minolta All in One Printer doesn't start up?
If your Konica Minolta All in One Printer doesn't start up when you turn on the main power switch, make sure the power supply plug is correctly inserted into the electrical outlet.
How to clear a paper misfeed in the bypass tray of Konica Minolta All in One Printer?
To clear a paper misfeed in the bypass tray of your Konica Minolta All in One Printer: * Remove all paper from the bypass tray. * If the misfed paper cannot be removed, open the upper right-side door, and then carefully pull out any misfed paper.
What to do if the message “Trouble” appears on Konica Minolta Printer?
When the message “Trouble” appears on your Konica Minolta printer, follow these steps: 1. Write down the malfunction code (e.g., C-0001) displayed on the call technical representative screen. 2. Turn off the printer using the power switch. 3. Unplug the printer. 4. Contact your technical representative and provide them with the malfunction code.
What to do if Konica Minolta All in One Printer doesn't start printing?
If your Konica Minolta All in One Printer doesn't start printing, check the following: * Ensure the right-side door of the machine is securely closed. * Make sure you have loaded paper of the appropriate size into the paper tray.
Why is Konica Minolta All in One Printer printed output too light?
If the printed output from your Konica Minolta All in One Printer is too light, there could be a couple of reasons: * The print density may have been changed from the printer driver. Check the printer driver setting. * The paper might be damp. Replace the paper with new paper.
Why is Konica Minolta All in One Printer printed output too dark?
If the printed output from your Konica Minolta All in One Printer is too dark, the print density may have been changed from the printer driver. Check the printer driver setting.
What to do if Konica Minolta All in One Printer image is not aligned properly on the paper?
If the image is not aligned properly on the paper when using your Konica Minolta All in One Printer, consider these potential causes: * The lateral guides might be incorrectly positioned against the edges of the paper. Slide the lateral guides against the edges of the paper. * Curled paper may have been loaded into the paper tray. Flatten the paper before loading it.
What to do if Konica Minolta All in One Printer printed page is curled?
If the printed page is curled when using your Konica Minolta All in One Printer, consider these potential causes: * Paper that curls easily (like recycled paper) may have been used. Remove the paper from the paper tray, turn it over, and then load it again. * Replace the paper with paper that is not damp.
What to do if Konica Minolta All in One Printer printed output is blurry?
If the printed output from your Konica Minolta All in One Printer is blurry, the paper might be damp. Replace the paper with new paper.
How to fix dark specks or streaks on Konica Minolta All in One Printer output?
If you notice dark specks, spots, or streaks throughout the printed output from your Konica Minolta All in One Printer, the electrostatic charger wire might be dirty. Use the charger-cleaning tool to clean the electrostatic charger wire.
General| Print Technology | Laser |
|---|---|
| Print Speed (Black) | 25 ppm |
| Print Speed (Color) | 25 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Operating System Compatibility | Windows, Mac, Linux |
| Duplex Printing | Yes |
| Type | Color Laser Printer |
| Connectivity | Ethernet, USB 2.0 |
| Paper Size | A4, A5, B5, Letter, Legal |
| Standard Paper Capacity | 250 sheets |
Information about Energy Star compliance and its benefits.
Legal information about trademarks and registered names used in the manual.
Details of the software license agreement for the product.
Explains the symbols, text formats, and conventions used in the manual.
General safety instructions for operating and maintaining the machine.
Information on regulatory compliance and certifications.
Identifies the locations of caution labels and notations on the machine.
Recommended clearances and space needed for machine operation.
General precautions for optimal machine performance.
Identifies and explains the function of various machine parts and options.
Instructions on fundamental operations like turning the machine on and off.
Explains the different interfaces available for connecting the printer to a computer.
Information about available printer drivers and their supported operating systems.
Lists the system requirements for installing printer drivers on computers.
Outlines the overall procedure for setting up the printing system.
Step-by-step instructions for installing printer drivers on various operating systems.
Procedure for removing installed printer drivers from the system.
Instructions for installing printer drivers on Macintosh computers.
Detailed steps for installing printer drivers on Mac OS X.
Instructions for installing printer drivers on Mac OS 9.2.
Explains how to perform printing operations from applications.
Procedure for printing a test page to verify the setup.
Instructions for configuring network printing connections.
General settings for printer functions accessible via the driver.
Steps to access the printer driver's configuration dialog.
Settings and procedures for configuring printer drivers on Macintosh.
Configuration of the PCL printer driver.
Common settings and buttons available across all driver tabs.
Settings related to document orientation, paper, binding, and output.
Settings for specifying front/back covers and page-specific configurations.
Settings for printing overlay documents or forms.
Settings for adding watermarks to printed documents.
Settings for adjusting print quality, color, and image types.
Settings for managing fonts used during printing.
Details on configuring settings within the Setup tab.
Procedure for defining and using custom paper sizes.
How to choose the paper tray for printing.
Procedure for associating specific paper types with paper trays.
Configuration for duplex and booklet printing options.
Settings for printing multiple document pages onto a single sheet.
How to adjust margins for binding or file insertion.
Configuration for stapling printed documents.
Configuration for punching holes in printed documents.
Settings for center binding and folding documents.
Options for printing, secured printing, or saving to user boxes.
Configuration for tracking print jobs by department and password.
Details on configuring settings within the Per Page Setting tab.
Configuration for printing overlay documents.
Procedure for creating and registering custom forms for overlay printing.
Configuration for adding watermarks to documents.
Customizing watermark fonts, position, and text.
Settings for adding sequential numbering to documents.
Settings for embedding patterns to prevent unauthorized copying.
Details on configuring quality settings within the Quality tab.
General explanation of specifying settings within the Quality tab.
Details on configuring font settings within the Font tab.
Configuration for specifying installed machine options.
Steps to select and configure installed machine options.
How to save and recall driver settings for PCL drivers.
Configuration of the PostScript printer driver for Windows.
Configuration of the PCL printer driver for Windows.
Configuration of the PPD printer driver for Windows.
Configuration of the PPD printer driver for Mac OS 9.2.
Configuration of the PPD printer driver for Mac OS X.
Identifies and explains the functions of the control panel keys.
General procedures for navigating and changing settings via the control panel.
How to configure the machine's sleep mode for energy saving.
Procedure for setting or changing the administrator password.
Provides a menu list of available parameters in utility mode.
Lists parameters and their initial settings for Job Operation, Secure Print, and User Box.
Parameters for specifying paper size and type for each tray.
Parameters for print reports, system settings, and power saving modes.
Parameters for automatic tray selection and handling of unmatched paper.
Parameters for print output, exit tray priority, and offset settings.
Parameters for PDL, paper tray, duplex, binding, staple, punch, and spool settings.
Specific parameters for PCL emulation settings.
Information on supported paper types and sizes.
Details on paper types and the maximum number of sheets that can be loaded.
Guidance on using special paper types like OHP, letterhead, and colored paper.
Lists types of paper to avoid and reasons for potential issues.
Recommendations for proper paper storage to prevent issues.
Specifies the printable area on paper and the associated margins.
How the machine automatically switches paper trays when one runs out.
Explains the default order in which paper trays are selected.
Instructions for loading paper into the machine's paper trays.
Specific instructions for loading paper into trays 2, 3, and 4.
Instructions for loading paper into the Large Capacity Tray (LCT).
Instructions for loading paper into the bypass tray.
How to configure finishing options like stapling and hole punching.
Configuration for punching holes in printed documents.
Settings for folding and stapling documents at the center.
Instructions for replacing the toner cartridge when it is empty or low.
Instructions for replacing staple cartridges when the finisher is low on staples.
Instructions for replacing the waste toner box when it is full.
Procedures for cleaning various parts of the machine.
How to clean the paper take-up roller.
Procedure for cleaning the electrostatic charger wire.
Procedure for cleaning the print head.
Instructions for emptying waste containers, like the hole-punch waste.
Guidance on what to do when a preventive maintenance message is displayed.
What to do when a general "Trouble" message appears.
How to clear paper misfeeds indicated on the screen.
Identifies paper misfeed codes and their locations within the machine.
Specific instructions for clearing paper jams in the bypass tray.
Specific instructions for clearing paper jams in the automatic duplex unit.
Specific instructions for clearing paper jams in Tray 1.
Specific instructions for clearing paper jams in Tray 2.
Specific instructions for clearing paper jams in Tray 3 or 4.
Specific instructions for clearing paper jams in the LCT.
Specific instructions for clearing paper jams accessed via the right-side door.
Specific instructions for clearing paper jams in the fusing unit.
Specific instructions for clearing misfeeds involving banner paper.
Specific instructions for clearing paper jams in the FS-501 finisher.
Specific instructions for clearing paper jams in the FS-603 finisher.
Specific instructions for clearing paper jams in the FS-514 finisher.
Specific instructions for clearing paper jams in the mailbin.
Specific instructions for clearing paper jams in the saddle stitcher.
Guidance on replenishing paper when indicated by the message.
Procedure for clearing jammed staples from the finishers.
Specific steps for clearing staple jams in the FS-501 finisher.
Specific steps for clearing staple jams in the FS-603 finisher.
Specific steps for clearing staple jams in the FS-514 finisher.
Specific steps for clearing staple jams in the saddle stitcher.
What to do when a "near life limit" message indicates part replacement.
Common troubleshooting steps for basic machine and finisher issues.
Troubleshooting specific to finisher operations.
Troubleshooting steps related to printer driver issues.
How to access and use the PageScope Web Connection utility for device management.
Lists the system requirements for using PageScope Web Connection.
Steps to access PageScope Web Connection via a web browser.
Describes the layout and components of the PageScope Web Connection interface.
Instructions on disabling browser cache for optimal PageScope Web Connection performance.
Steps for accessing the Administrator mode of PageScope Web Connection.
Functions available in the User mode of PageScope Web Connection.
Information and settings related to the machine's system configuration.
Functions for checking job history and managed jobs.
Functions for creating and managing user boxes for storing documents.
Options for checking default print settings and printing reports.
Overview of system settings configurable in Administrator mode.
Procedures for using document boxes for saving and retrieving data.
How to view and access existing user boxes.
Step-by-step instructions for opening a user box.
Viewing details of saved documents within boxes and performing management actions.
How to modify attributes of existing user boxes.
Procedure for removing user boxes.
Steps for creating new user boxes for document storage.
Specifies job operations like secured printing and saving documents.
How print documents are stored on the machine as jobs.
Procedure for retrieving stored print jobs from the machine.
Requirements for printing when account tracking is enabled.
Steps to configure account track settings for printing in Windows.
Steps to configure account track settings for printing on Mac OS X.
Checking job status through PageScope Web Connection.
Instructions for loading and printing on banner paper.
How to specify custom paper sizes for banner paper printing.
Technical specifications for the bizhub C250P machine.
Technical specifications for various optional units and accessories.
Technical specifications for the Finisher FS-603.
Technical specifications for the Punch Kit PK-501.
Technical specifications for the Finisher FS-514.
Technical specifications for the Punch Kit PK-510.
Information about the machine's configuration page.
Lists of PCL and PS fonts supported by the machine.
Content of the standard test page for print quality verification.
Definitions of technical terms used in the manual.
Alphabetical listing of topics and their corresponding page numbers.
To Next Page
