Konica Minolta BIZHUB C30P User Manual (English)

Other manuals for Konica Minolta BIZHUB C30P

Service Manual350 pages

Reference Guide292 pages

Questions and Answers:

R
Rachel SandersAug 20, 2025
What to do if my Konica Minolta All in One Printer power is not on?
- M
  mstevensAug 20, 2025
  If your Konica Minolta All in One Printer isn't powering on, consider these potential causes and solutions: - The power cord is not correctly plugged into the outlet. Turn off the printer, confirm that the power cord is correctly plugged into the outlet, and then turn on the printer. - Something is wrong with the outlet connected to the printer. Plug another electrical appliance into the outlet and see whether it operates properly. - The power switch is not correctly turned on (I position). Turn the power switch off (O position), then turn it back to the on (I position). - The printer is connected to an outlet with a voltage or frequency that does not match the printer specifications. Use a power source with the specifications listed in appendix A, “Technical Specifications.”
H
Heidi ChavezAug 23, 2025
How to fix a Konica Minolta All in One Printer media misfeed message that won't go away?
- J
  jonesbrianAug 23, 2025
  If the media misfeed message persists on your Konica Minolta All in One Printer, it could be due to these reasons: - The right side cover needs to be opened and closed again to reset the printer. Open and close the right side cover of the printer again. - Some media remains misfed in the printer. Recheck the media path and make sure that you have removed all of the misfed media.
A
aguilarvirginiaAug 26, 2025
Why does my Konica Minolta All in One Printer pull multiple sheets at once?
- C
  Chris HopkinsAug 26, 2025
  Your Konica Minolta All in One Printer might be pulling several sheets together for these reasons: - The front edges of the media are not even. Remove the media and even up the front edges, then reload it. - The media is moist from humidity. Remove the moist media and replace it with new, dry media. - Too much static electricity is present. Do not fan transparencies.
D
douglas34Aug 27, 2025
What to do if media type error appears on Konica Minolta BIZHUB C30P Printer?
- D
  Dr. Jonathan RodriguezAug 28, 2025
  If a media type error appears on your Konica Minolta Printer, especially when “Transparency” is selected for Tray 1, Tray 2, Tray 3, or Tray 4, make sure to specify a media type that is actually supported by these trays.
B
Bryan JohnsonAug 29, 2025
Why the specified name cannot be used for the name of a custom paper size in Konica Minolta BIZHUB C30P Printer?
- P
  Patrick BrownAug 30, 2025
  Due to limitations of Mac OS X, certain names cannot be used for custom paper sizes on your Konica Minolta Printer. Avoid using names like “Custom” or general paper size names specified in the PPD files, such as “A4” and “B4”. Specify a different name instead.
J
joshua76Sep 1, 2025
What to do if pages are not correctly collated while printing from Acrobat Reader on Konica Minolta BIZHUB C30P?
- E
  Erica SimmonsSep 1, 2025
  If you encounter a printing error with Acrobat Reader on your Konica Minolta Printer, where pages are not correctly collated or the print job is cancelled, try printing using the Preview application provided by your operating system.
R
rnguyenSep 3, 2025
Why when printing multiple copies of multiple pages on a single sheet of paper with Collated selected, the pages are printed continuously on Konica Minolta Printer?
- A
  adrianraySep 4, 2025
  When printing multiple copies of multiple pages on a single sheet of paper with your Konica Minolta Printer, ensure that the 'Collated' option is not selected, as it cannot be used in this scenario. The pages will print continuously if 'Collated' is selected.
F
Fred WoodsSep 6, 2025
What to do if the dialog box displays incorrectly after you select another manufacturer’s printer and then select the bizhub C30P Konica Minolta Printer again?
- D
  Daniel GuerreroSep 6, 2025
  If the dialog box displays incorrectly after switching between different printer manufacturers and then selecting the bizhub C30P again, close the Print dialog box and then reopen it.
O
omorrisSep 8, 2025
Why when printing 2 pages on a single sheet of paper, the pages are not centered on the paper with Konica Minolta BIZHUB C30P?
- S
  Samantha KimSep 8, 2025
  When printing 2 pages on a single sheet of paper with your Konica Minolta Printer, the pages may not be centered for certain paper sizes due to operating system limitations. This can occur with Legal, Letter Plus, Foolscap, Government Legal, Statement, and Folio paper sizes.
A
Anthony JohnsonSep 12, 2025
Why the custom paper size is different from the size that was set on Konica Minolta Printer?
- M
  Michele DavisSep 12, 2025
  Custom paper sizes on your Konica Minolta Printer might slightly change due to operating system variations. For example, 5.80" might change to 5.79".

Konica Minolta BIZHUB C30P Specifications

General

Printer Type	Color Laser Printer
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Processor	800 MHz
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed (Color)	30 ppm
Print Speed (Black)	30 ppm
Connectivity	USB 2.0, Ethernet
First Print Out Time (Color)	8.5 seconds
First Print Out Time (Black)	8.5 seconds
Media Sizes Supported	A4, A5, Letter, Legal
Memory (Maximum)	512 MB
Dimensions (W x D x H)	16.5 x 19.5 x 15.0 inches
Weight	49.2 lbs