5
2. Open the FIRMWARE folder of the SD memory card to confirm that the FIRMWARE.BIN file has
been successfully copied.
3. Disconnect the camera from the computer or remove the SD memory card from the card reader.
- If you are using Windows Me, 2000 or XP, click the unplug-or-eject-hard-
ware icon in the lower right-hand corner of the screen, wait until the safe-to
remove-hardware window appears, then remove the SD memory card from
the card reader, or disconnect the camera from PC.
- When the camera is connected to PC via the cradle, turn the camera off in advance of remov-
ing it from the cradle.
Preparing the SD memory card for updating
To Next Page
Loading...
Need help?
General
