What to do if 'Err' appears on Konica Minolta Dynax 60 Digital Camera?
If 'Err' appears on the data panel of your Konica Minolta Digital Camera, remove the batteries and reinsert them after turning the camera off and on. If the camera still malfunctions, contact an authorized Konica Minolta service facility.
Why are my Konica Minolta Dynax 60 flash pictures too dark?
If your Konica Minolta Digital Camera flash pictures are too dark, ensure that the subject is within the flash range.
How to fix autofocus on Konica Minolta Dynax 60 Digital Camera?
If the autofocus on your Konica Minolta Digital Camera isn't working, it could be due to a special focusing situation, the camera being set to manual focus, or the subject being too close. Use focus lock or manual focus. Alternatively, press the AF/MF button, or check the lens’ minimum focus distance.
What to do if Konica Minolta Dynax 60 shutter cannot be released?
If the shutter of your Konica Minolta Digital Camera cannot be released, it may be because focus cannot be confirmed, or the camera is attached to a microscope or telescope. Use focus lock or manual focus. Alternatively, set custom 13 to setting 2.
Why is the bottom of the picture dark on my Konica Minolta Digital Camera?
If the bottom of your Konica Minolta Digital Camera picture is dark when using the built-in flash, it may be because a lens hood was attached or the subject distance was less than 1m (3.3ft). Remove the lens hood and ensure the subject is at least 1m (3.3ft.) from the camera to prevent lens shadowing.
Why does the flash fire when pressing halfway on Konica Minolta Dynax 60?
The flash may fire when the shutter-release button is pressed partway down on your Konica Minolta Digital Camera because the flash was used as an AF illuminator to assist the autofocus system. To turn off the AF illuminator, set the flash mode to flash cancel or custom 10 to setting 2.
General| Brand | Konica Minolta |
|---|---|
| Model | Dynax 60 |
| Category | Digital Camera |
| Language | English |
Warnings regarding improper battery usage and potential hazards.
Explains the function of the mode dial as a switch and mode selector.
Identifies the data panel and describes the viewfinder area.
Lists and explains various indicators displayed on the camera's data panel.
Describes focus frames and signals within the viewfinder.
Explains exposure, flash, and sync indicators shown in the viewfinder.
Step-by-step instructions for attaching the camera strap.
Instructions on how to detach a lens from the camera body.
Specifics for the date model regarding clock and calendar settings.
How to power the camera on and select operating modes.
Proper grip and posture for steady camera operation.
Lists scenarios where autofocus may struggle and suggests solutions.
Functions and settings controlled by the camera's mode dial.
How to enable or disable camera audio feedback.
Recommended temperature and environmental conditions for camera use.
To Next Page