Why doesn't the autofocus work on my Konica Minolta Digital Camera?
The autofocus may not work due to a special focusing situation, or because the camera is set to manual focus. Try using focus lock or manual focus. Also, check if the subject is too close and verify the lens’ minimum focus distance. Change the focus mode if it is set to manual.
What to do if the shutter cannot be released on Konica Minolta Digital Camera?
If the shutter cannot be released, it might be because the focus cannot be confirmed, or the camera is attached to a microscope or telescope. Try using focus lock or manual focus. If attached to external equipment, turn off shutter lock.
Why is my Konica Minolta Digital Camera flash picture too dark?
If your flash pictures are too dark, the subject may be beyond the flash range. Ensure the subject is within the flash's effective range.
How to stop the flash firing when pressing the shutter button halfway on Konica Minolta Digital Camera?
The flash might be used as an AF illuminator to assist the autofocus system. To prevent this, turn off the AF illuminator or set the flash mode to flash cancel.
Why is the bottom of the picture dark when using flash on Konica Minolta Digital Camera?
If the bottom of the picture is dark when using the built-in flash, a lens hood might be attached, or the subject distance was less than 1m (3.3ft). Remove the lens hood. To prevent lens shadowing, ensure the subject is at least 1m (3.3ft.) away from the camera.
General| Model | DYNAX40M |
|---|---|
| Category | Digital Camera |
| Sensor size | APS-C (23.5 x 15.7 mm) |
| Image Sensor | CCD |
| Shutter speed | 30 - 1/4000 sec |
| Continuous shooting | 3 fps |
| LCD screen size | 1.8 inches |
| Storage media | CompactFlash (Type I or II) |
| Battery | NP-400 rechargeable Li-ion battery |
| Weight | 510 g (body only) |
| Effective Pixels | 6.1 megapixels |
| Lens | Interchangeable |
| Aperture Range | Depends on lens |
| ISO Sensitivity | 200, 400 |
| LCD Screen | 1.8 inches, 118, 000 pixels |
Essential warnings and precautions for safe operation, including battery handling.
Guidance on how to hold the camera steady and perform fundamental shooting actions.
Steps for attaching strap, lens, loading film, and installing batteries for first use.
Step-by-step guide to composing, focusing, and capturing an image with the camera.
Overview of Program, Aperture Priority, Shutter Priority, and Manual exposure modes.
Adjusting exposure levels to make images lighter or darker, overriding the meter.
Solutions for problems like autofocus failure, shutter issues, blurred pictures, and error messages.
To Next Page