EasyManua.ls Logo

Konica Minolta DYNAX40M - Accessory Flash Notes; Wireless Controller IR-1 N

Konica Minolta DYNAX40M
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56 A
CCESSORY NOTES
ACCESSORY FLASH NOTES
When using an accessory flash, the viewfinder flash signals are the
same for the built-in flash (p. 25). The following flash units are
compatible with this camera:
Program/Maxxum Flash 5600HS (D)
Program/Maxxum Flash 3600HS (D)
Program/Maxxum Flash 2500 (D)
Contact your Konica Minolta dealer for information on these
products.
The flash mode of a mounted
accessory flash can be set by
pressing the flash-mode button (1) on
the camera. The flash mode is
displayed on the data panel.
The camera can be permanently damaged if used with the Wireless
Controller IR-1N.
WIRELESS CONTROLLER IR-1N
Do not use the built-in or accessory flash when using a filter with a
filter factor greater than 0, a close-up lens, or the focus-range limiter
or macro release on certain lenses. This will result in an incorrect
exposure.
1

Related product manuals