EasyManua.ls Logo

Konica Minolta DYNAX40M - Technical Specifications

Konica Minolta DYNAX40M
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62 A
PPENDIX
TECHNICAL SPECIFICATIONS
Camera type: 35mm SLR with built-in flash and
autoexposure.
Lens mount: Minolta A-type bayonet mount
Viewfinder: SLR roof mirror type, 90% field of view.
Magnification: 0.75X
Shutter type: Electronically-controlled, vertical-traverse,
focal-plane type.
Shutter speeds: 30 - 1/2000s, bulb
Flash sync. speed: 1/90s
Focus system: TTL phase-detection system using CCD
line sensors. Autofocus and manual focus
modes.
AF sensitivity range: EV -1 to18 (ISO 100)
AF illuminator: Built-in with range of 1.0 - 5.0m (3.3 - 16.4
ft.). Automatically activated in low-light and
low-contrast situations.
AF control: Automatic AF - automatic selection
between single-shot AF and continuous
AF depending on subject movement.
Exposure modes: P, A, S, M, and 5 Subject Program modes
(Portrait, Landscape, Close-up, Sports,
Night Portrait)
Metering: TTL metering, direct TTL flash metering.
Metering cell: 2-segment SPC.
Metering range: EV 4 - 20 (ISO 100, f/1.4 lens)
Film-speed setting: Automatic: ISO 25 - 3200 (DX-coded film)
Manual: ISO 6 - 6400 in 1/3 Ev
increments.
Flash: ISO 25 - 1000.

Related product manuals