Chapter 4 Operation
4-5
3 Operating the Fiche Film
3.1 Film Selection
1
"Film Selection" screen is opened by "SCAN Mode", and the type of the fiche film is
selected.
3.2 Film Insertion
1
Take hold of the Carrier Handle and pull it forward fully, then the Fiche Glass will open.
NOTE ! When the Fiche Carrier is pulled out to the maximum position, do not put heavy
objects on the Carrier Table. And, prohibit lean against the Fiche Carrier as is
could cause damage.
2
Insert the film between the Fiche Glasses.
Aperture Card
Place the Card so that the film area is on the right side, face-up.
Fiche, Jacket Film
Place the film so that the title is toward the rear and face-up.
To Next Page
Loading...
Need help?
General
