Storage, disposal
Store the headphone wall holder in a dry place.
Recycle disassembled components:
u Scrape all components made of metal.
u Recycle or reuse all plastic, paper, and cardboard components.
u Sort all other components according to material composition and dispose of them
u according to local regulations.
Contact information
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2
97877 Wertheim
Germany
Phone: +49 9342/8060
Fax: +49 9342/806-150
E-Mail: contact@k-m.de
Web: www.k-m.de
16310-022-55 Rev.02 03-80-915-00 6/22
Fault and troubleshooting
Fault/cause Check/Remedy
Mount wobbles on the wall
● Check screw connection between wall and mount and
● retighten if necessary.
Maintenance, cleaning and repair
u Maintenance: Regularly check if the screw connections are tight.
u Cleaning: Use a slightly damp cloth to clean the headphone wall holder. Do not use chlorinated
u or abrasive cleaning agents. These will cause damage to the surface and varnish.
u Repair: Immediately repair any damage that occurs and stop using the headphone wall holder.
u Maintenance work may only be carried out if you have the necessary knowledge. If any parts
u are missing, contact the manufacturer at www.k-m.de. Here you can find a corresponding
u spare parts list by entering the article number on the type label. Use this page to reorder
u missing or damaged components.
To Previous Page
Loading...
Need help?
General
