Konig KN-WS600 - User Manual

Need help?

Do you have a question about the Konig KN-WS600 and is the answer not in the manual?

Summary

Installation

Battery and Adapter Installation

Details on installing batteries and adapter for the monitor unit.

Selecting Location for Anemometer

Anemometer Mounting and Calibration

Mounting the Anemometer

Instructions for securely attaching the anemometer to a mast.

Calibrating Anemometer and Installing Batteries

Steps to calibrate wind direction and install batteries for the anemometer.

Rain Gauge Setup

Selecting Location for Rain Gauge

Battery Installation for Rain Gauge

Guide to inserting batteries into the rain gauge transmitter.

Mounting the Rain Gauge

Steps to attach the rain gauge securely to a surface.

OPERATION

Connecting Remote Sensors

Anemometer Sensor Connection

Information on connecting the anemometer and troubleshooting RF issues.

Rain Gauge Sensor Connection

Details on connecting the rain gauge and resolving RF connection failures.

Remote Sensor Connection Status

Temp;Humidity Sensor Connection

Connecting additional temperature/humidity sensors and RF status.

Weather Forecast and Barometric Pressure

Setting Sea Level Pressure

How to input local sea level pressure for accurate weather forecasts.

Rainfall Measurement Modes

Wind Speed and Direction

Wind Direction and Speed Display

Gust Wind and Wind Chill Alarms

High Gust Wind Alarm Setup

How to set and enable high wind gust alarms.

Low Wind Chill Alarm Setup

Radio-Controlled Clock

Clock Synchronization Status

Clock and Calendar

Manual Clock and Calendar Setting

Konig KN-WS600 Specifications

General

Brand	Konig
Model	KN-WS600
Category	Weather Station
Language	English

Related product manuals