To Next PageTo Next Page
Need help?Do you have a question about the Konig KN-WS400 and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Weather Forecast | Yes |
| Clock Function | Yes |
| Forecast | Yes |
| Humidity Measurement Range | 20% to 95% |
| Wireless Range | 30 m |
| Indoor Temperature | 0°C to 50°C |
Details the initial power-on sequence, default settings, and reset behavior of the device.
Describes the specific functions of each key (Set, Alarm, CH, Up, Down, Snooze, Channel) based on operation type.
Explains how to perform common operations like setting time, alarm, and switching units in normal display mode.
Step-by-step guide for setting the year, month, date, language, hour, minute, and time zone.
Instructions for setting the alarm hour and minute, including confirmation and exit procedures.
Details the RF receiving state, channel clearing, and behavior when no signal is detected.
Describes the alarm sound patterns and the snooze function when the alarm is active.
Specifies the operating ranges and display capabilities for indoor and outdoor temperature and humidity.
Explains the weather forecast feature represented by different weather icons.
Important safety warnings regarding electrical shock, product handling, and exposure to water or moisture.
Guidelines for cleaning the product and handling servicing to avoid damage.
Details the warranty terms, limitations, and conditions for product use.
Covers general disclaimers about design changes, trademarks, and product recognition.
Highlights specific symbols and compliance information related to electrical product disposal and EU directives.
