Konig SEC-CAM31+ User Manual

Remove the protective
film from the glass
Infrared LED
CCD camera
Sensitivity sensor
SEC-CAM31+
CCTV COLOUR CAMERA
Features:
- Automatic Gain Control
- Automatic Electronic Shutter
- Weatherproof housing (IP66)
- IR LEDs for night view
Packaging contents:
1x CCTV camera
Description:
1.
Notice:
IR LED will be active with 0 Lux. Camera will automatically
switch to B/W picture in this status.
Safety precautions:
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician if service is required.
Disconnect the product from mains and other equipment if a
problem should occur.
Warranty:
No guarantee or liability can be accepted for any changes and
modifications of the product or damage caused due to incorrect
use of this product.
General:
Designs and specifications are subject to change without a
notice.
Specifications:
Image Device: 1/3” CCD
Lens: 6 mm
Synchronization: Internal SYNC
Horizontal Resolution: 520 TV Lines
Minimum Illumination: 0 Lux
Electronic Shutter (AES): (1/50) ~ 1/100,000 Sec.
S/N Ratio: More than 48 dB (AGC OFF)
Gamma Correction: 0.45
Video Output: 1 Vp-p/75 Ω, BNC
Power Supply: 12 VDC±10% / 300 mA
Operating Temperature: -10°~50°C
Copyright ©
2.
ENGLISH
INSTRUCTIONS

Konig SEC-CAM31+ Specifications

General

Connectivity	Wired
Night Vision	Yes
Lens	3.6 mm
Weather Resistance	IP66
Power Supply	12V DC
Type	Dome
Operating Temperature	-10°C to +50°C

Summary

SEC-CAM31+ CCTV Colour Camera

Features

Lists key functionalities: Automatic Gain Control, Automatic Electronic Shutter, Weatherproof housing (IP66), IR LEDs for night view.

Packaging Contents

Specifies the items included in the package, which is one CCTV camera unit.

Product Information and Specifications

Notice

Informs that IR LED activates at 0 Lux and the camera automatically switches to B/W picture.

Safety Precautions

Advises to reduce electric shock risk by having service performed only by authorized technicians.

Warranty

States no guarantee or liability for changes, modifications, or damage due to incorrect product use.

General

Mentions that designs and specifications are subject to change without prior notice.

Specifications

Provides detailed technical specs including Image Device, Lens, Resolution, Illumination, S/N Ratio, Power Supply, and Operating Temperature.