Need help?Do you have a question about the Konnwei KW681 and is the answer not in the manual?
General| Brand | Konnwei |
|---|---|
| Model | KW681 |
| Category | Test Equipment |
| Language | English |
Read and display vehicle fault codes, including current, pending, and permanent DTCs.
Clear emission-related diagnostic information and fault codes from the vehicle's ECU.
Check the status of the I/M readiness monitors since DTCs were cleared or the drive cycle.
View live data stream with graphical and numeric display of vehicle parameters.
Capture and display vehicle conditions recorded when an emission fault occurred.
View the last results of O2 sensor tests performed by the ECU, not live data.
Read results of on-board diagnostic monitoring tests for specific vehicle components or systems.
Initiate an EVAP system leak test by signaling the vehicle's onboard computer.
Display detailed vehicle identification and calibration information, including VIN.
Guide to selecting battery type, standard, and location for testing vehicle batteries.
Execute a battery test by selecting location and adjusting CCA value according to battery specifications.
Evaluate battery performance during cranking and assess the charging system's health.
Test motor battery status including voltage, CCA, resistance, and charging value.
View voltage waveforms to analyze battery status during ignition, discharge, and charging.
Access and review all stored test results, including DTCs, Datastream, Freeze Frame, and Waveform.
Input a DTC to find its explanation and identify the cause of the fault code.
Select the preferred language for the device interface from a list of supported languages.
Update the tool software via PC using a USB cable and print data.
Access information about the device, OBD2 functions, modes, compatible vehicles, and data stream terms.
Information on product warranty, free updates, and contact details for customer support.
To Next Page
