Need help?Do you have a question about the Konnwei KW710 and is the answer not in the manual?
General| Operating Temperature | -20°C to 60°C |
|---|---|
| Display | 2.8 inch TFT LCD |
| Storage Temperature | -20°C to 70°C |
| Supported Protocols | ISO9141, CAN |
| Battery | Built-in rechargeable lithium battery |
Instructions for navigating and using the motorcycle testing menu.
Guide to selecting vehicle type and battery location for car testing.
Steps for testing truck batteries, including battery type and standard selection.
Explains how to access and interpret voltage waveform data during tests.
Explains the meaning of different test outcomes like Good Battery, Recharge, Replace.
Steps for performing the cranking system test and understanding its prompts.
Interpreting results like cranking voltage, time, and system status.
Guide to performing the charging system test with engine RPM and load adjustments.
Explanation of charging system test outcomes, including normal, low, and high output.
Defines normal discharge, starting, and charging voltages for battery health assessment.
Instructions for updating the tool's software via a computer.
Information on obtaining support, troubleshooting, and tool repair.
To Next Page
