Need help?Do you have a question about the Konnwei KW860 and is the answer not in the manual?
General| Device Type | OBD2 Scanner |
|---|---|
| Operating Temperature | 0°C to 60°C (32°F to 140°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Operating System Compatibility | N/A (Standalone device) |
| Display | 2.8 inch TFT color display |
| Compatibility | Works with most OBD2 compliant vehicles (1996 and newer) |
| Functions | Read and clear trouble codes, view I/M readiness |
| Power Supply | Powered via OBD2 port |
| Weight | 450g |
| Connectivity | Wired connection via OBD2 port |
| Supported Protocols | CAN, ISO9141, KWP2000, J1850 VPW, J1850 PWM |
| Battery | No internal battery |
| Languages | English, French, German, Dutch, Spanish, Russian, Portuguese |
Explains the first generation of On-Board Diagnostics (OBD I).
Codes stored by the OBD II system to identify problem areas.
Describes the standardized 16-cavity connector for scan tool interface.
Indicators showing if emissions components have been evaluated.
Indicates if the vehicle's PCM monitor system has completed testing.
Defines key terms like PCM, MIL, DTC, Enabling Criteria, Drive Cycle, Freeze Frame.
Introduces OBD II communication protocol modes for diagnostic requests.
Identifies the physical components and buttons of the scan tool.
Explains how to access and view the monitor status interface.
Details how to select and view diagnostic trouble codes.
Guides on how to clear diagnostic trouble codes from the vehicle.
Explains how to check vehicle readiness for inspection and maintenance.
Describes how to view live sensor data from the vehicle.
Explains how to view data recorded when a fault occurred.
Details how to perform and interpret O2 sensor test results.
Describes reading results of on-board diagnostic monitoring tests.
Explains how to initiate an EVAP system leak test.
Shows how to retrieve VIN, CID, and CVN from the vehicle.
Guides on inputting DTCs to get their definitions.
Manage recorded data through review and deletion.
View recorded Diagnostic Trouble Codes.
View recorded live sensor data.
View recorded freeze frame data.
Remove stored diagnostic trouble codes.
Remove stored live sensor data.
Remove stored freeze frame data.
To Next Page
