Kool-It Ikon KBC36 - Table of Contents; Congratulations on Your New Cooler

Service and Installation Manual
4
CONTENTS
SPECIFICATIONS ......................................................................................................................... 4
CONGRATULATIONS ON YOUR NEW COOLER ............................................................... 4
INSTALLATION ........................................................................................................................................ 4
ELECTRICAL CONNECTION ...................................................................................................................... 5
OPERATION INSTRUCTIONS ..................................................................................................... 5
STORAGE OF FOOD STUFFS ........................................................................................................... 5
MAINTENANCE ......................................................................................................... 5
TROUBLE SHOOTING ................................................................................................................................ 6
DISPOSAL ........................................................................................................................................... 6
SPECIAL PIONTS TO NOTE ....................................................................................................................... 6
WIRING DIAGRAM .............................................................................................................. 7
SPECIFICATION
MODEL#
V/Hz/Ph
AMPS
STORAGE
CAPACITY
HP
BTU
CHARGE
OZ
SHIP
WEIGHT
LBS
NEMA
PLUG
KBC36
115/60/1
1.8
10
3/8
2000
2.12
161
5-15P
KBC50
115/60/1
3.0
15
1/2
3200
2.47
310
5-15P
KBC65
115/60/1
3.0
20
1/2
5400
3.17
353
5-15P
KBC95
115/60/1
3.3
26
1/2
7600
3.53
439
5-15P
CONGRATULATIONS ON YOUR NEW COOLER
Note these instructions apply to all coolers. Installations of equipment may not exactly correspond to your
model.
INSTALLATION
Make sure that the cooler is not damaged on arrival. Your supplier must be notified of any transport damage,
within 24 hours of delivery.
The cooler should be placed in a warm, dry room, with suitable ventilation.
Place the cooler in such a way, as to allow the free circulation of air around it. That is, with at least 100mm
space all around it.
Never place the cooler in strong sunlight. The cooler be placed on a level surface. Make sure that it does not
rock.
If the cooler has been stored or transported cold, it must not be started before the compressor is judged to