Remove plug from wall outlet.
Pull out the water tank. (shown as fig.5)
Clean the water tank with a little mild detergent on a
towel and then rinse in water.
4.
Put the water tank in place after cleaning.
Problems & Solutions
If there is something wrong during operation, it may not be the unit’s
problem. You may check against the following list before send for repair.
1. The plug is not securely
inserted into the socket or
not connected well.
2. The ”I” button, on the
power switch which is at
the side of the unit body,
is not pressed. 3. The
“ON/OFF” button is not
1. Insert the plug pin into the
wall socket and make sure it is
connected well. 2. Press the “I”
button, on the power switch
which is at the side of the unit
body. 3. press “ON/OFF”
button after plugged.
clogged with dust and
dirt, which affects the
unit’s performance. 2.
The air vent is obstructed.
1. Clean the filtration mesh.
2. Remove the foreign objects
from the air vent.
Notice:
1. If the problem cannot be found in the list or it persists, please contact our
service center or a qualified technician for further inspection.
2.
Do NOT open and repair the
unit by yourself
Basic Terms & Conditions to avail Warranty
• It is certified that Koolen Product is guaranteed for free
repair up to 24 months from the date of purchase against
assembly/manufacturing faults. This guarantee in invalid under
the following circumstances.
1. If product is not used in accordance with the operational manual
supplied by the company or any misuse.
2. If the unit is damaged due to fall or electric fluctuation.
3. If dismantled or tampered in any way.
4. Any fault occurred due to incorrect power supply.
• Koolen Products are guaranteed to be free of all workmanship and
material defects During warranty period, no charges will be claimed
for parts & repair.
To Next Page
Loading...