To Next Page
L
Luis BakerAug 11, 2025
How to fix a KoolMore KM-CR24-NG pilot light that won't ignite?
- JJoseph AndradeAug 11, 2025
If your KoolMore Ranges pilot flame cannot be ignited, it could be due to several reasons. First, ensure that the gas pressure is adequate by adjusting the relieve valve to achieve the correct pressure. If the pressure is correct, check if the nozzle is blocked and unblock it if necessary. Also, make sure the thermocouple connection is secure by screwing it tightly. If these steps don't resolve the issue, the thermocouple may be defective and require replacement. Finally, the gas control valve might be malfunctioning, in which case it should be replaced.
General
