WARNING: HOT SURFACE
BEFORE REPLACING THE ACCESSORIES, SWITCH OFF THE
APPLIANCE AND REMOVE THE PLUG!DO NOT INSERT THE
APPLIANCE PLUG INTO THE SOCKET WITHOUT FIRST INSTALLING
ALL THE NECESSARY ACCESSORIES.
PAY UTMOST ATTENTION IN CASE THE IRON IS USED IN THE
PRESENCE OF CHILDREN.
NEVER LEAVE THE IRON UNATTENDED.
DO NOT POUR TOXIC SUBSTANCES, ACIDS, SOLVENTS,
DETERGENTS AND OTHER CORROSIVE SUBSTANCES INTO THE
WATER RESERVOIR.
CHECK THAT THE STEAM EMISSION GASKETS ARE NOT
CLOGGED.
DO NOT DIRECT THE STEAM JET TOWARDS BODILY PARTS OF
PEOPLE OR ANIMALS.
DO NOT DIRECT THE STEAM JET OR USE THE IRON ON CLOTHES
BEING WORN.
ATTENTION! THE FABRICS ON WHICH STRONG STEAM HAS BEEN
APPLIED MAY REACH VERY HIGH TEMPERATURES.
IRON ON SUITABLE IRONING BOARDS RESISTANT TO THE HEAT
ISSUED WITH THE STEAM;
DURING AND AFTER USE MAKE SURE THAT THE IRON IS PLACED
ON A STABLE SURFACE.
BEFORE TURNING ON THE IRON, MAKE SURE THAT NOTHING
IS OBSTRUCTING THE RESERVOIR INLET AND THAT THE LID IS
CORRECTLY CLOSED.
WAIT UNTIL THE IRON HAS COOLED DOWN COMPLETELY
BEFORE DISPOSING OF IT.
To Next Page
Loading...
