FOR INITIAL USE
‒ Remove any label or protective cover, straighten up the device and the
cable before use.
‒ When using the device for the first time, it may require few minutes until
steam comes out.
‒ To avoid to overload the circuit, it is not recommended to use any other
electrical circuit with the same socket when already in use.
‒ Once the packaging of the device has been opened, check that all
materials and items in it match with all items of the list.
INSTALLATION AND USE
1. Press and hold the button to drop the tank, pull out the water tank, then
open the press-on cap and fill the tank with tap water. Make sure to fill the
water tank at least one-third, and do not exceed the maximum water level;
and then get the tank back to its position.
2. Hold the device handle with one hand and then mount the brush on the
nozzle panel.
3. Finally, connect the device to a power outlet; the power indicator light
will light up. Once the initial warm-up time is over, the light will switch o:
this means the device is readyto be used.
IRONING
The appliance is very easy to use, suitable for ironing wrinkles / folds on
clothing, curtains, and decorative fabrics as well as refreshing clothes. The
device is suitable with most of fabrics.
NOTE: The device it is not designed to be used with hot steam when
clothes are in horizontal position.
1. Check if the clothes are made of breathable fabric in order to avoid to
collect steam in the fabric, getting it wet.
2. Check the pockets of clothes are empty.
3. Check the label of the clothes to make sure it does not spoils with the hot
steam.
4. It is recommended not to use this device on metal parts because they
may fade.
5. When pressing the switch, you will feel a vibration and you will
simultaneously hear a low buzzing sound. This is normal.
6. Insert the steam-head of the device into the fabrics making sure to keep
a distance of at least 5 cm.
7. If the appliance steamer buzz sound increases but no steam comes out,
please check the water level of the tank and refill with water if required.
8. By releasing the switch, the steam flow will stop.
To Next Page
Loading...