AFTER EACH USE
1. When stop using, press the power switch or the power cord from the
power outlet.
2. Remove the water tank, open the radiator pressure cap, invert the tank,
the water tank emptied.
3. Upright on a flat desktop, and wait for the product to cool.
CARE, CLEANING AND STORAGE
- Remove the brush from the panel and then clean with a slightly damp
cloth.
- Do not use harsh or abrasive cleaners or solvents.
- Do not immerse the device in water or other any other liquid.
- Do not let the device to fall down or throw it away or try to bend it.
- Do not attempt to disassemble the appliance.
- After each use, empty the water tank.
- Do not keep the device near a source of heat or under direct sunlight.
- Always make sure the steam holes are clean and free from encrustations
or clogged.
- It is recommended to store the device vertically on a flat surface, such
as a wardrobe.
To Next Page
Loading...