31
EMPTYING THE WATER TANK
1. Remove the water tank as indicated above.
2. Tilt the water tank to empty it.
3. Reinsert the tank as described above.
CAUTION! DO NOT MOVE THE DEHUMIDIFIER IF THE TANK IS FULL!
NOTE:
After prolonged use of the dehumidifier, the water tank may be completely
full. In this case, a warning light will indicate the need to empty the tank.
6. OPERATING INSTRUCTIONS
1. Power button:
This button controls the switching on and off of the appliance.
2. Dehumidification mode:
Press the multifunction button to the left of the power button to select the
following modes (press repeatedly to switch between modes):
1. Normal dehumidification: ventilation intensity and humidity adjustable
2. Continuous dehumidification: low ventilation, humidity not adjustable
3. Ventilation mode: adjustable ventilation intensity, humidity not adjustable
4. Drying mode: predefined high ventilation mode (ventilation intensity and
humidity not adjustable).
NOTES: The drying mode allows to favour and speed up the drying process
of wet clothes. Before starting the function, make sure that the appliance is
placed at a minimum distance of 50 cm from the drying rack on which the
clothes to be dried are placed and in any case never place the clothes to be
dried directly on the appliance!
To Next Page
Loading...
