Kooper 5902518 - Troubleshooting

35
8. TROUBLESHOOTING
Problem Possible cause Solutions
Dehumidier does not
work
The power plug is not
connected correctly
Connect the power
plug correctly
The water tank is full Empty the water tank
completely.
The water tank has not
been positioned cor-
rectly
Position the water tank
correctly
Reduced dehumidica-
tion capacity
Reduced dehumidica-
tion capacity.
Clean the lter
The air inlet and out-
let from the air inlet
and outlet slots is ob-
structed
Remove any objects
obstructing the proper
air ow and position
dehumidier as indi-
cated above to ensure
minimum air inlet and
outlet
Appliance makes noise
during operation
The unit is well positio-
ned
Place the machine unit
on a at, stable, non-
slip surface.
The appliance stops
during the dehumidi-
cation process
The ambient tempe-
rature is too high or
too low and out of the
dehumidier’s working
range.
The dehumidier will
start automatically
when the room tempe-
rature is within the wor-
king range.
Garments are not dried The room temperature
is very low.
Wet clothes can dry
more slowly at low
temperatures
The phenomena listed below are due to the scope of operation of the device: