FROST, SUN, ETC..
NEVER USE THE DEVICE:
WITH WET OR DAMP HANDS;
IF DROPPED AND HAS OBVIOUS BREAKS OR MALFUNCTIONS;
IF THE PLUG OR POWER SUPPLY CORD IS DEFECTIVE;
IN HUMID OR GASSATURATED ENVIRONMENTS.
DO NOT COVER THE APPLIANCE WITH TOWELS, CLOTHING, ETC.
PLACE THE APPLIANCE ONLY ON HORIZONTAL, STABLE
COUNTERTOPS, AWAY FROM SHOWERS, BATHTUBS, SINKS, ETC.
DO NOT ALLOW WATER OR OTHER LIQUIDS TO GET INSIDE THE
APPLIANCE IN ORDER TO AVOID ELECTRIC SHOCK.
IF THE APPLIANCE GETS WET OR COMES INTO CONTACT WITH
WATER, DO NOT USE IT AND HAVE IT CHECKED BY A SPECIALIZED
LABORATORY.
ALWAYS REMOVE THE PLUG FROM THE POWER SUPPLY
IMMEDIATELY AFTER USE AND BEFORE PERFORMING ANY
CLEANING OR MAINTENANCE WORK.
TO TURN THE APPLIANCE OFF, TURN THE TIMER KNOB TO THE
“” POSITION, THEN UNPLUG IT FROM THE SOCKET, PULLING THE
PLUG AND NOT THE CORD.
ANY REPAIRS SHOULD ONLY BE CARRIED OUT BY A QUALIFIED
TECHNICIAN. REPAIRING THE APPLIANCE YOURSELF CAN BE
EXTREMELY DANGEROUS.
IF THE POWER CORD IS DAMAGED, IT MUST BE REPLACED BY
THE MANUFACTURER OR ITS TECHNICAL SERVICE DEPARTMENT
OR OTHERWISE BY A SIMILARLY QUALIFIED PERSON SO AS TO
To Next Page
Loading...