FAULTS DESCRIPTION AND TROUBLESHOOTING
FAULT DESCRIPTION SYMBOL POSSIBLE CAUSE POSSIBLE SOLUTION
Despite being
connected to the
power outlet; the fryer
will not start
The basket was not closed
properly
Check that the basket
is tightly closed
No menu is shown on
the screen
The device is in standby mode Press the power button
and the screen will
return to normal mode
The fryer is on but
the appliance is not
working
Thermal protection
intervention.
Contact the after-sales
customer service
department
The fryer is on but not
working
The circuit board is defective,
replace it
Contact the after-sales
customer service
department
The fryer is on
The heating coil is broken. Contact the after-sales
customer service
department
The display does not
work
There is no
display
The device is not properly
connected to the power
Check that the power
plug is inserted
correctly
The device emits
smoke when first used
The display
works normally
There is some protective oil on
the heating coil so it is to see
some smoke during the first
10 minutes of use (first time
only)
Before the first use, cut
lemon slices and bake
them at the highest
temperature for about
15 minutes
Smell of burnt plastic
during first use
The display
works normally
There is some protective oil on
the heating coil so it is normal
to see some smoke during the
first 10 minutes of use (first
time only)
Before the first use, cut
lemon slices and bake
them at the highest
temperature for about
15 minutes
The fryer emits a lot of
smoke during the first
use
The display
does not work
The mains voltage does not
match the data on the rating
label and the fuse is broken.
Check that the mains
voltage matches the
data on the rating label
To Next Page
Loading...