IF THE APPLIANCE IS WET OF GETS IN CONTACT WITH WATER,
DO NOT USE IT AND HAVE IT CHECKED BY A SPECIALISED
LABORATORY.
ALWAYS REMOVE THE MAINS PLUG FROM THE POWER SUPPLY
IMMEDIATELY AFTER USE AND BEFORE PERFORMING ANY
CLEANING OR MAINTENANCE WORK.
REPAIRS SHOULD ONLY BE CARRIED OUT BY A QUALIFIED
TECHNICIAN.
REPAIRING THE APPLIANCE BY YOURSELF CAN BE EXTREMELY
DANGEROUS.
AN APPLIANCE THAT IS NOT WORKING ANYMORE, MUST BE
RENDERED UNUSABLE, BY CUTTING THE POWER CORD BEFORE
THROWING IT.
CLEAN THE APPLIANCE USING A DAMP CLOTH. DO NOT USE
SOLVENTS OR ABRASIVE DETERGENTS.
DO NOT OBSTRUCT ANY VENTILATION OPENINGS.
DO NOT ALLOW THE POWER CORD TO BE WALKED ON OR
PINCHED, ESPECIALLY ALONG WITH PLUGS OR SOCKETS, AND AT
THE OUTPUT POINT OF THE DEVICE.
DANGER! FLAMMABLE MATERIALS
DO NOT PLACE/USE ELECTRICAL DEVICES INSIDE THE
APPLIANCE COMPARTMENT.
DO NOT USE ANY EXTENSION CORDS OR SOCKETS THAT REMAIN
ON THE BACK OF THE PRODUCT.
To Next Page
Loading...