CLEANING AND MAINTENANCE
With the exception of the motor unit (9), all parts can be cleaned with water and detergent. Rinse
well to remove all traces of detergent.
- Clean the base with a damp cloth and dry it before storage or assembly before use.
CAUTION: The device is equipped with six sharpened blades: pay extra attention when cleaning or
whenever the tumbler is not in place.
- Do not use solvents or acid pH products, such as bleach, or abrasive products to clean the unit.
- Do not immerse the appliance body in water or other liquids, or under running water.
- It is advisable to clean the appliance regularly and remove any food residues.
Note: The glass can only be washed by hand. Make sure you clean and dry it properly before
storing or using it.
RECHARGE
If the led light (10) flashes red or the blades fail to turn, plug the USB cable into the charging port of
the device (12) and the other end to a USB port to run the charging operation
To Next Page
Loading...