23
HOW TO OPERATE
1. Install the side brush.
2. Place the machine on the surface to clean.
3. Turn on the power button, an acoustic signal will be heard. The LED
indicator is on ,the machine enters standby status.
4. Press the start/pause button, the machine starts working.
5. When in operation, press the start/pause button, the machine will
stop temporarily.
6. If the machine stops unexpectedly and the LED indicator quick fla-
shes in 3Hz, please check carefully if the machine is entangled or if
the brush wheel fails to operate. If the machine is entangled, take it to
a spacious place to restart. If the brush wheel fails to operate, take
it out and clean it. If the machine still doesn’t work properly, long press
the on/off button to power off the machine and start it again.
7. If the machine stops working and the LED indicator slow flashes in
1Hz, it means that it ran out of battery. Please charge it in time. The
LED indicator flashes when charging and it will remain still when the
charge is completed. You can now unplug the charger.
■ How to assemble side brush
Hexagonal hole face
down
There is a hexagonal hole at the bottom of side brush, align the
brush and press it until clicks in.
To Next Page
Loading...