24
HOW TO REMOVE AND REINSTALL THE MIDDLE BRUSH
Turn the robot upside down on a flat surface, press the middle brush
release catch, take out the brush wheel. Clean the brush and the
side wheel and make the reverse procedure to reinstall it.
HOW TO CHARGE
Note: If the machine shuts down while working that means that the
power is low and that the machine needs to be recharged.
1. Plug the adapter into the power outlet.
2. Plug the lead in the charging port next to the ON/OFF button.
3. When fully charged, it will beep again. You can now remove the
charger.
4. Unplug the charger and the power cord.
CLEANING AND MAINTENANCE
• Make sure the unit is unplugged before cleaning.
• Do not clean the machine and power supply by immersing in water
or other liquids.
1. Metal parts (power plug or terminal): wipe them with a clean and dry
cloth.
2. Plastic parts: wipe them gently with a clean, soft cloth together with
water or a mild detergent.
3. Do not use gasoline, alcohol, rubber water and other strong irritant
cleaning products to clean it.
4. Store the robot in a cool and dry place.
To Next Page
Loading...