Remote control
Note: 2 x AAA batteries are not included.
The Cooler comes with a remote control for your convenience.
The functions on the remote control are the same as the buttons on the evaporative
cooler.
To install the batteries, first remove the back of the remote control by sliding the
back battery cover o.
Insert the batteries inside the battery compartment matching polarity icons with
those in the battery compartment and then refit the cover securely.
Battery Type: “1.5V 2 x AAA”
Do Not mix new and old batteries in the remote control.
To prevent corrosion, remove the batteries if the remote control will not be used over a lengthy
period.
To Next Page
Loading...
