http://www.koopor.com/plus/ KOOPOR Plus 9
1. Enter Memory Mode: switch between TC Mode, VW Mode and Memory Mode by
pressing KOOPOR Button+Up Button simultaneously while screen is unlocked.
2. In the Memory Mode, use the UP/ DOWN Button to switch between the
Hard/Normal/Soft/ Max/Min vaping effects. And then wait for 5 seconds or hold down
KOOPOR Button to enter M01-M20, and adjust default wattage among them by pressing
the UP/DOWN Button. Their wattages are adjustable from 6W to 200W. After the above
steps are completed, press KOOPOR Button or wait for 5 seconds to save the wattage you
prefer.
8. Self-protection
KOOPOR has dedicated to make high performance and reliable APVs for vapors. KOOPOR
Plus comes with the following self-protection functions. When the device is under abnormal
condition, it will enter protection mode, and stop working to ensure the users’ security until the
problem is solved.
1) Atomizer Intelligent Recognition
2) System Over-heating Protection
3) Current Overload/Short-circuit Protection
4) VoltageLow/Over Protection
5) Vaping-time Limit Protection
8. Warnings
1. Please keep the device away from excessive temperature and humid environment to
prolong its life time.
2. Please take the battery out of the device when it’s not used for a long time.
3. Please keep the device away from children, pregnant women, and minors (under 18 years
of age).
To Next Page
Loading...