Koowheel K5 - Battery Pack

轮毂：Wheel hub
左踏板：Left pedal
手柄：Handle
右踏板：Right pedal
电池盒：Battery compartment
Schematic diagram 1
Schematic diagram 2
3. Battery Pack
3.1 Insert the battery pack into the compartment following the foolproof direction
indicated. Take “M3*8 hexagonal socket head cap screws” and screw them into
the holes on the left side of the battery pack using a 2mm socket head wrench; and
take “M3*8 hexagonal socket head cap screws” and screw them into the holes on
the right side of the battery pack. Finally tighten the screws in order.