5.2 Start Up
Press the "On/Off" button. The scooter successfully starts up and you will hear a
little "beep" sound, and the LED panel lights switch on, indicating final
temperature, battery level, and speed information.
5.3 Precautions Before Using
1. Stand behind the scooter and adjust the handle till the pedals are level. At this
time, the scooter is at a balanced state, and ready for use. First step on one of the
pedals with one foot; place the other foot after you hear the "beep" sound, which
indicates the scooter is in appropriate pressure state and maintains balance. If the
pedals are not balanced, readjust them and make them level.
2. Balance Test : Place the scooter on a horizontal position, and press the "On/Off"
button for 3s; release the button when you hear the "beep" sound and the side
indicator LED lights flash. After conducting the balance test, you need to perform
the riding test.
5.4 Stepping On and Maintaining Balance
Compared to riding a regular motorbike, it is easier to learn to operate the
self-balancing scooter. Most beginners only take 3min to expertly operate the
scooter. Have an instructor stand in front of the scooter, and hold your two hands
so that you avoid losing your balance due to nervousness or improperly
positioning yourself, as you step on to the scooter for first time.
1. After stepping on the scooter, look straight ahead, rather than looking down.
2. First step on the pedal with one foot, and maintain your body’s weight on the
pedal as you align your center of gravity (imagine your stance when you are
taking a step forward).
3. Slowly step on the pedal with the other foot (imagine a standing stance on flat
ground), trust your capability to balance on the scooter, stay calm and relaxed,
and look forward.
Schematic diagram 4
5.5 Move Forward / Reverse/ Brake
1. Slowly lean forward; the scooter will move forward. Stand erect to slow down
To Next Page