Kopp POWERversal User Manual

D
O
G
• Switch at least one of the connected consu-
mers to operating mode within 30 seconds.
• Switching from stand-by mode to operating
mode causes increased power consumption
and is automatically detected by the intelli-
gent electronics.
• The grounding outlets then remain switched
on for the duration of the increased power
consumption, meaning as long as the
device is being used.
• If no device is switched from stand-by mode
to operating mode within 30 seconds, the
connected devices are switched off again.
Note:
• The stand-by power consumption of the
connected device(s) must be between 5W
and 100 W.
• Connected loads which are outside of this
range cannot be programmed.
Switch-off procedure:
• If the television is switched from operating
mode to stand-by mode for example, the
intelligent electronics recognizes this reduc-
tion in power consumption and switches the
grounding outlet boxes off within approxi-
mately 30 seconds if the stand-by power is
the same as or less than the saved value of
the programming procedure.

Kopp POWERversal Specifications

General

AC outlets quantity	5 AC outlet(s)
Voltage	250 V
Maximum current	16 A
Power protection features	Over voltage
Cable color	Gray
On/off switch	Yes
Product color	Grey, Red

Weight and Dimensions

Depth	71 mm
Width	482.6 mm
Height	58.3 mm