31
2.2 Channel
To access the menu, press the button MENU and then, using the arrow [Vol+/Vol-],
select [Channel]. Using the arrow [CH+/CH-] you can select the sub-menu (TV
Channel List, Radio Channel List, Delete All) and press OK to open the selected
item. Press EXIT to exit the menu.
▪ TV Channel List: You can lock / skip / move the single channel. To do this, simply
move to the single channel, press the color key for the desired function of the remote
control to highlight, at the top, the text Lock / Skip / Move (some features require the
entry of the password). Press the OK button at this point. A new icon will appear on
the right, indicating that it has been selected. A blocked channel requires a password
for viewing, while a skipped channel is simply not displayed. It is also possible, by
pressing the FAV key, and following the same procedure as above to associate a
channel with at least one of the 8 available lists of favorites. An icon with a heart will
appear to the right of the channel. Press Exit to apply the selected settings. Touch
on the FAV button to select one list of favorite channels. To exit of this list of favorites
click FAV, use the arrow [CH+/CH-] and select ALL TV List and press on OK.
▪ Radio Channel List: It is possible, similarly for radio channels, to do the above for
video channels.
▪ Delete all: You can delete all stored channels.
2.3 Installation
To access the menu, press the button MENU and then, using the arrow [Vol+/Vol-],
select [Installation]. Using the arrow [CH+/CH-] you can select the sub-menu (Auto
Channels Scan, Manual Channels Scan, LCN) and press OK to open the selected
item. Press EXIT to exit the menu.
▪ Manual Channels Scan: You can scan manually. It is strongly recommended to
perform automatic channel scanning.
▪ Auto Channels Scan: Allows automatic channel scanning. It is advisable to select
the Country, FTA mode and Mode T2Signal Only (tick NO, otherwise the decoder
will only search for signals in DVBT2 standard). Highlight the item Search and press
the OK button on the remote control. The tuning process is completely automatic but
can take several minutes. After tuning, you can watch TV.
▪ LCN: Enables or disables the LCN (Logical Channel number). The LCN function allows
to assign a predefined position in the list to each channel/service. Activation is
recommended.
To Next Page
Loading...
