To Next PageTo Next Page
Need help?Do you have a question about the Korg CLIPHIT and is the answer not in the manual?
General| Type | Electronic Drum Kit |
|---|---|
| Sounds | 100 |
| Built-in Speaker | Yes |
| Effects | Reverb |
| Connectivity | USB |
| Power | Battery or AC Adapter |
| Headphone Output | Yes |
Using the unit in direct sunlight or extreme temperature/humidity locations can cause malfunction.
Connect the designated AC adapter to an AC outlet of the correct voltage only.
Operate the unit at a distance from radios and televisions to avoid reception interference.
Avoid excessive force on controls and wipe exterior with a dry cloth, avoiding liquid cleaners.
Keep liquids and metal objects away from the equipment to prevent breakdown or shock.
Connect the three included clips to CLIP 1, CLIP 2, and CLIP 3 jacks on the front panel.
Connect pedal switches to PEDAL 1 (bass drum) and PEDAL 2 (hi-hat control) jacks.
Adjust the volume for each instrumental part (CLIP 1, 2, 3, PEDAL 1).
Adjusts the overall volume of all instrumental parts.
Selects a drum kit, which changes the sound of each instrumental part.
Turns the unit on/off; indicator lights up when power is on.
Connect the optional AC adapter here for power.
Input sound from an audio player or other source device.
Connect headphones equipped with a stereo mini-phone plug.
Install four AA alkaline batteries here.
Outputs the sound of your performance.
Clips with built-in sensors that trigger drum sounds when striking attached objects.
Play bass drum or switch hi-hat between open/closed.
Detach cover, install four AA batteries, observing polarity. Replace when low.
Connect clips to CLIP jacks and pedals to PEDAL jacks for desired functions.
Attach clips to objects carefully, ensuring stability and avoiding damage.
Long-press the power button to turn the unit on or off. Indicator shows status.
Unit powers off automatically after 30 minutes of inactivity; can be enabled/disabled.
Connect clips/pedals, turn on power, select drum kit via sound selector.
Adjust overall volume with VOLUME knob and individual parts with LEVEL dials.
Strike objects for clip sounds; pedal controls bass drum or hi-hat state.
Provides physical dimensions and weight of the CLIPHIT unit.
Lists items included with the product, such as manual, clips, pedal switch, and batteries.
Lists separately sold accessories like pedal switches and AC adapters.
Details drum kits, controls, connections, amp output, power supply, and battery life.
