Korg EX-8000 Owner's Manual

SELECTING PROGRAMS
q How to Select a Program Number
m fyi; sure the PROGRAM switch is set to ON. (LED
Q Press the NUMBER keys to select any program num-
ber (11 - 88).
m How to Select Bank Hold
q Pressing the BANK HOLD switch preserves the left
digit of the selected program number.
q Now if you press any of the NUMBER keys, only the
right digit will change.
q When you want to change to a program number in a
different bank, press the BANK HOLD switch again to
cancel BANK HOLD. You can now enter both digits
using the NUMBER keys.
PROGRAM
p+-.---LED IS ON
Example: To select program number...
3
. ‘,,V . ,
* A dash aooears in
the right hand digit
Press
until you select the
second digit. (This
LOAD
means it is waiting
--.
for you to select the
second digit.)
BANK HOLD
..* . . ,
An LED dot lights up to indicate
that the bank number (2) will not
change.
m
[LED dot lights.
Only this digit changes when
you press the number keys.
BANK HOLD
Now press
The LED dot goes out when
BANK HOLD is off.

Korg EX-8000 Specifications

General

Brand	Korg
Model	EX-8000
Category	Control Unit
Language	English