Korg EX-8000 Owner's Manual

CREATING SOUNDS
em B P (Break Point Level)
This parameter determines the VCF EG output voltage
after the decay time. If this is set to the same value as
the sustain level, then the envelope becomes a conven-
tional ADSR type.
This parameter controls how long it takes for the VCF
EG output voltage to change from the break point level
to the sustain level.
m
SUS (Level)
This parameter determines the VCF EG output voltage
after the slope time.
This parameter determines how long it takes for the VCF
EG output voltage to fall to zero level after the note is re-
leased on the keyboard.
Controls the degree of timbre change according to the
speed of playing a note on the keyboard.
When the value is made larger, the degree of timbre
change becomes greater. (Actually, change of EG out-
put becomes larger.)
Set valtie at “0” when using a MIDI keyboard without
Touch Sensitivity.
VALUE
BREAK POINT LEVEL
I7
(J
0
VALUE 1
SLOPE TIME1
VALUE
l-l
l-l
I
3 I
J I
SUSTAIN LEVEL
0
I
Max.
VALUE
::
I
3:
RELEASE TIME
Short
I
Long
VALUE
1 DEGREE OF TIMBRE CHANGE
Max. change
.

Korg EX-8000 Specifications

General

Brand	Korg
Model	EX-8000
Category	Control Unit
Language	English