CREATING SOUNDS
3,
Writing
Programs to
MemoryJ
fl
Features and Functions for Control
Used to specify the program number.
I
Used to start writing programs.
Shows presently selected program number.
When this switch is set to ENABLE, memory write
operation is enabled.
q
Program Write Procedure
Create a sound (as described in the previous section
of this manual).
q
Set the front panel WRITE switch to the ENABLE
posision.
q
Press the WRITE key on the front panel.
4
I----
ENABLE
m
DISABLE
WRITE
m At this time, the program number flashes.
Flashing