CREATING SOUNDS
,
a
Press the
WRtTE
key on the front panel.
The program number selected in stepOflashes.
WRITE
Press
-
1~
Use
the,NUMBER
keys to select the program number
where you want the sound to be located. When the
s.electiDn
j.s
done,
the
sound specified by step
m
is
repositioned to the selected program number. (The
previous contents under the program number are
erased.)
fi
If the previous contents should not be erased, the
previous contents
must
be repositioned to another
unused program location before step
@J.
L!Z
Follow step
@
through
@
above, to rearrange your
sounds in the order that is most convenient for perfor-
mance.