Korg EX-8000 Owner's Manual

MIDI IMPLEMENTATION
1R I
ecognized Receive Data
I
0 CHANNEL MESSAGES
1000 nnnn
1001 nnnn
1001 nnnn
Okkk kkkk
oxxx xxxx
Okkk kkkk
Okkk kkkk
Note OFF
(NOTE I)
Velocrty WIII be Ignored.
ovvv vvvv Note ON ( NOTE I)
v v v v v v v= I -127 (I5 steps)
0000 000’0
Note OFF ( NOTE I)
1011 nnnn
0000 0001
. ovvv vvxx 0% Modulatton
(5 Btts resolutron)
1011 nnnn
0000 0010
ovvv vvxx VCF Modulation
(5
Bits resolutron)
1011 nnnn
0000
01 I I
ovvv vvvv
Volume
(7
Brts resolvtron)
1011 nnnn
0100 0000
0000 0000 Damper Pedal OFF
1011 nnnn 0100 0000
0111 III1
Damper Pedal ON
1011 nnnn
0100 0001
0000 0000
Portamento OFF
loll nnnn
0100 0001
OIlI Iill
Portamento ON
I011 nnnn
OIlI 1011 0000 0000
All Notes OFF
1011 nnnn
0111 1100 0000 0000 Omm Mode OFF (All Notes OFF)
1011 nnnn
OIlI II01
0000 0000
Omnr Mode ON (All Notes OFF)
1011 nnnn
0111 Ill0
oxxx xxxx
(All Notes OFF)
1011 nnnn
OIlI III1
0000 0000
(All Notes OFF)
1100 nnnn
OPPP PPPP
Program Change
(
NOTE 2)
I101 nnnn
ovvv vvvx
After Touch
(6
Bits resolut Ion)
II IO nnnn
oxxx xxxx
Obbb bbbb
Pitch Bender Change
LSB
will be Ignored.
MSB
WIII be recognized.
(b b b b b b b=64 : CENTER)
* nnnn = 0 - 15:
Channel number specified by parameter 84. When the mode is OMNI ON, all the data will be received. When the
mode is OMNI OFF, only data of the channel designated by the parameter will be received. As to MODE
MESSAGE, however, designated channel data on!y will be received even if the mode is OMNI ON.
NOTE
1. NOTE NUMBER (Okkkkkkk) = 24 -
108. If data outside this range is received, the data will be transposed to the
same note on the nearest octave. If keywindow parameter 87 and 88 are specified, the data will be changed accord-
ingly.
2. PROGRAM NUMBER (Opppppp) = 0 - 63. If the data is larger than 63, it will be recognized as a number that has
64 subtracted from it.
-54
I

Korg EX-8000 Specifications

General

Brand	Korg
Model	EX-8000
Category	Control Unit
Language	English