Operation–Setting mode
48
■
LCD Backlight setting
1
When you choose the LCD Backlight setting, the main display will
indicate “LCD Backlight setting” (select the display to set).
2
Use the main encoder to select the display for which you want to make
backlight settings.
Encd (Encoder)
Specify the backlight color of the sub-displays when they are showing
the encoders.
Sldr (Slider)
Specify the backlight color of the sub-displays when they are showing
the sliders.
Main
Specify the backlight color of the main display.
3
Press the OCTAVE SHIFT/CURSOR [®] key to move to “Backlig
Select” (select the backlight color).
4
Use the main encoder to select the backlight color.
Off: Backlight off
Red: red
Grn: green
Org: orange
5
Press the OCTAVE SHIFT/CURSOR [√] key to return to “Display
Select,” and make settings for another display in the same way.
6
When you have finished making settings for each display, press the
[ENTER] key. The settings will be saved, and you will return to Play
mode.
If you decide to cancel, press the [EXIT] key to return to Play mode.
Never turn off the power while settings are being saved. Doing so may
destroy internal data.
■
Pad Illumination setting
1
When you choose the Pad Illumination setting, the main display will
indicate “Padblink setting” (make settings for pad illumination).
2
Use the main encoder to specify whether a pad will light briefly (“one-
shot”) or not change when you play a pad in Play mode.
BlinkOff: The illumination will not change. (The pad will remain dark
or lit green.)
BlinkOn: The pad will briefly light or go dark.
3
Press the [ENTER] key.
The settings will be saved, and you will return to Play mode.
If you decide to cancel, press the [EXIT] key to return to Play mode.
Never turn off the power while settings are being saved. Doing so may
destroy internal data.
(Green)(Red)
To Next Page
Loading...
