● INPUT TRIM : Since most Eurorack modules send a hot signal, we recommend changing
the KORG NTS-1 INPUT TRIM to -24dB to avoid clipping your input signal. Refer to the
KORG user manual .
● OUTPUT LEVEL : The Korg NTS-1 sends a LINE LEVEL output signal. If patching back
into a eurorack system, the level will be extremely low, we recommend purchasing a
pre-amp module of some sort to boost the signal back to eurorack standards or use the
NTS-1 as your main output.
Recommended Add-Ons:
Abyss Devices - AMP:
https://abyssdevices.com/product/line-level-instrument-amplifier-50x-gain-for-eurorack/
To Previous Page
Loading...
