8
4: Mirror
Tune your instrument until the LED at the center of the LED meter lights up
brightly.
e larger the pitch variation, the more that the LEDs towards either side light
up.
3. When you nish making the setting, wait for about two seconds without
pressing any buttons.
e note name display blinks twice to indicate that the display mode has been
set. e Pitchblack X will automatically return to tuner mode.
Tip: e display mode setting is stored in memory when you press the TUNER
ON/OFF switch to turn the tuner o, and is preserved even if you remove the
battery or unplug the AC adapter.
Bright mode (brightness) settings
is sets the brightness (in two levels) of the display. e indicator is set to a
brighter setting by factory default.
1. Hold down the DISPLAY/BRIGHT button.
e brightness of the display will change. e Pitchblack X will automatically
return to tuner mode.
Tip: e bright mode setting is stored in memory when you press the TUNER
ON/OFF switch to turn the tuner o, and is preserved even if you remove the
battery or unplug the AC adapter.
The pitch is sharp.
In tune.
The pitch is at.
To Next Page
Loading...
